In preparing to head to ZF9CW in about ten days, I wanted to take something that would allow me to do a better job on my radials under my shunt fed tower. With the thing so close to salt water the detriment is that everything corrodes in a short period of time.
I was looking for something to help solve my problem and found this on Amazon: https://www.amazon.com/dp/B08N6X576D?psc=1&ref=ppx_yo2ov_dt_b_product_details You can add however many you want to size a square or most any shape to surround a vertical or tower. I will likely use 8 of them to make a square to go around a 55G tower if I decide to use that one someday. In my case, since I cannot run radials onto my neighbors property I will only use three of them to go around my 25G tower. The holes are M6 size. I put together four of these plates in a square and have stainless steel M6 hardware installed in the 28 holes. Even for this small version you could have 3 radials to each connection point and have 84 radials. If you are interested send me an email and I will send you a picture of the thing put together. I think it will help with my corrosion problem and wanted to share the information. 73...Stan, K5GO/ZF9CW/ZF5T _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector