Filename: 302-padding-machines-for-onion-clients.txt Title: Hiding onion service clients using padding Author: George Kadianakis, Mike Perry Created: Thursday 16 May 2019 Status: Accepted Ticket: #28634
0. Overview Tor clients use "circuits" to do anonymous communications. There are various types of circuits. Some of them are for navigating the normal Internet, others are for fetching Tor directory information, others are for connecting to onion services, while others are simply for measurements and testing. It's currently possible for MITM type of adversaries (like tor-network-level and local-area-network adversaries) to distinguish Tor circuit types from each other using a wide array of metadata and distinguishers. In this proposal, we study various techniques that can be used to distinguish client-side onion service circuits and provide WTF-PAD circuit padding machines (using prop#254) to hide them against certain adversaries. 1. Motivation We are writing this proposal for various reasons: 1) We believe that in an ideal setting MITM adversaries should not be able to distinguish circuit types by inspecting traffic. Tor traffic should look amorphous to an outside observer to maximize uncertainty and anonymity properties. Client-side onion service circuits are an easy target for this proposal, because we believe we can improve their privacy with low bandwidth overhead. 2) We want to start experimenting with the WTF-PAD subsystem of Tor, and this use-case provides us with a good testbed. 3) We hope that by actually starting to use the WTF-PAD subsystem of Tor, we will encourage more researchers to start experimenting with it. 2. Scope of the proposal [SCOPE] Given the above, this proposal sets forth to use the WTF-PAD system to hide client-side onion service circuits against the classifiers of paper by Kwon et al. above. By client-side onion service circuits we refer to these two types of circuits: - Client-side introduction circuits: Circuit from client to the introduction point - Client-side rendezvous circuits: Circuit from client to the rendezvous point Service-side onion service circuits are not in scope for this proposal, and this is because hiding those would require more bandwidth and also more advanced WTF-PAD features. Furthermore, this proposal only aims to cloak the naive distinguishing features mentioned in the [KNOWN_DISTINGUISHERS] section, and can by no means guarantee that client-side onion service circuits are totally indistinguishable by other means. The machines specified in this proposal are meant to be lightweight and created for a specific purpose. This means that they can be easily extended with additional states to do more advanced hiding. 3. Known distinguishers against onion service circuits [KNOWN_DISTINGUISHERS] Over the past years it's been assumed that motivated adversaries can distinguish onion-service traffic from normal Tor traffic given their special characteristics. As far as we know, there has been relatively little research-level work done to this direction. The main article published in this area is the USENIX paper "Circuit Fingerprinting Attacks: Passive Deanonymization of Tor Hidden Services" by Kwon et al. [0] The above paper deals with onion service circuits in sections 3.2 and 5.1. It uses the following three "naive" circuit features to distinguish circuits: 1) Circuit construction sequence 2) Number of incoming and outgoing cells 3) Duration of Activity ("DoA") All onion service circuits have particularly loud signatures to the above characteristics, but WTF-PAD (prop#254) gives us tools to effectively silence those signatures to the point where the paper's classifiers won't work. 4. Hiding circuit features using WTF-PAD According to section [KNOWN_DISTINGUISHERS] there are three circuit features we are attempting to hide. Here is how we plan to do this using the WTF-PAD system: 1) Circuit construction sequence The USENIX paper uses the directions of the first 10 cells sent in a circuit to fingerprint them. Client-side onion service circuits have unique circuit construction sequences and hence they can be fingeprinted using just the first 10 cells. We use WTF-PAD to destroy this feature of onion service circuits by carefully sending padding cells (relay DROP cells) during circuit construction and making them look exactly like most general tor circuits up till the end of the circuit construction sequence. 2) Number of incoming and outgoing cells The USENIX paper uses the amount of incoming and outgoing cells to distinguish circuit types. For example, client-side introduction circuits have the same amount of incoming and outgoing cells, whereas client-side rendezvous circuits have more incoming than outgoing cells. We use WTF-PAD to destroy this feature by changing the number of cells sent in introduction circuits. We leave rendezvous circuits as is, since the actual rendezvous traffic flow usually resembles well normal Tor circuits. 3) Duration of Activity ("DoA") The USENIX paper uses the period of time during which circuits send and receive cells to distinguish circuit types. For example, client-side introduction circuits are really short lived, wheras service-side introduction circuits are very long lived. OTOH, rendezvous circuits have the same median lifetime as general Tor circuits which is 10 minutes. We use WTF-PAD to destroy this feature of client-side introduction circuits by setting a special WTF-PAD option, which keeps the circuits open for 10 minutes completely mimicking the DoA of general Tor circuits. 4.1. A dive into general circuit construction sequences [CIRCCONSTRUCTION] In this section we give an overview of how circuit construction looks like to a network or guard-level adversary. We use this knowledge to make the right padding machines that can make intro and rend circuits look like these general circuits. In particular, most general Tor circuits used to surf the web or download directory information, start with the following 6-cell relay cell sequence (cells surrounded in [brackets] are outgoing, the others are incoming): [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [BEGIN] -> CONNECTED When this is done, the client has established a 3-hop circuit and also opened a stream to the other end. Usually after this comes a series of DATA cell that either fetches pages, establishes an SSL connection or fetches directory information: [DATA] -> [DATA] -> DATA -> DATA The above stream of 10 relay cells defines the grand majority of general circuits that come out of Tor browser during our testing, and it's what we are gonna use to make introduction and rednezvous circuits blend in. Please note that in this section we only investigate relay cells and not connection-level cells like CREATE/CREATED or AUTHENTICATE/etc. that are used during the link-layer handshake. The rationale is that connection-level cells depend on the type of guard used and are not an effective fingerprint for a network/guard-level adversary. 5. WTF-PAD machines For the purposes of this proposal we will make use of four WTF-PAD machines as follows: - Client-side introduction circuit hiding machine (origin-side) - Client-side introduction circuit hiding machine (relay-side) - Client-side rendezvous circuit hiding machine (origin-side) - Client-side rendezvous circuit hiding machine (relay-side) In the following sections we will analyze these machines. 5.1. Client-side introduction circuit hiding machines [INTRO_CIRC_HIDING] These two machines are meant to hide client-side introduction circuits. The origin-side machine sits on the client and sends padding towards the introduction circuit, whereas the relay-side machine sits on the middle-hop (second hop of the circuit) and sends padding towards the client. The padding from the origin-side machine terminates at the middle-hop and does not get forwarded to the actual introduction point. Both of these machines only get activated for introduction circuits, and only after an INTRODUCE1 cell has been sent out. This means that before the machine gets activated our cell flow looks like this: [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [INTRODUCE1] Comparing the above with section [CIRCCONSTRUCTION], we see that the above cell sequence matches the one from general circuits up to the first 7 cells. However, in normal introduction circuits this is followed by an INTRODUCE_ACK and then the circuit gets teared down, which does not match the sequence from [CIRCCONSTRUCTION]. Hence when our machine is used, after sending an [INTRODUCE1] cell, we also send a [PADDING_NEGOTIATE] cell, which gets answered by a PADDING_NEGOTIATED cell and an INTRODUCE_ACKED cell. This makes us match the [CIRCCONSTRUCTION] sequence up to the first 10 cells. After that, we continue sending padding from the relay-side machine so as to fake a directory download, or an SSL connection setup. We also want to continue sending padding so that the connection stays up longer to destroy the "Duration of Activity" fingerprint. To calculate the padding overhead, we see that the origin-side machine just sends a single [PADDING_NEGOATIATE] cell, wheras the origin-side machine sends a PADDING_NEGOTIATED cell and between 7 to 10 DROP cells. This means that the average overhead of this machine is 11 padding cells. In terms of WTF-PAD terminology, these machines have three states (START, OBF, END). They move from the START to OBF state when the first non-padding cell is received on the circuit, and they stay in the OBF state until all the padding gets depleted. The OBF state is controlled by a histogram which specifies the parameters described in the paragraphs above. After all the padding finishes, it moves to END state. We also set a special WTF-PAD flag which keeps the circuit open even after the introduction is performed. In particular, with this feature the circuit will stay alive for the same durations as normal web circuits before they expire (usually 10 minutes). 5.2. Client-side rendezvous circuit hiding machines The rendezvous circuit machines apply on client-side rendezvous circuits and only after the rendezvous point has been established (REND_ESTABLISHED has been received). Up to that point, the following cell sequence has been observed on the circuit: [EXTEND2] -> EXTENDED2 -> [EXTEND2] -> EXTENDED2 -> [ESTABLISH_REND] -> REND_ESTABLISHED which matches the general circuit construction sequence [CIRCCONSTRUCTION] up to the first 6 cells. However after that, normal rendezvous circuits receive a RENDEZVOUS2 cell followed by a [BEGIN] and a CONNECTED, which does not fit the circuit construction sequence we are trying to imitate. Hence our machine gets activated right after REND_ESTABLISHED is received, and continues by sending a [PADDING_NEGOTIATE] and a [DROP] cell, before receiving a PADDING_NEGOTIATED and a DROP cell, effectively blending into the general circuit construction sequence on the first 10 cells. After that our machine gets deactivated, and we let the actual rendezvous circuit shape the traffic flow. Since rendezvous circuits usually immitate general circuits (their purpose is to surf the web), we can expect that they will look alike. In terms of overhead, this machine is quite light. Both sides send 2 padding cells, for a total of 4 padding cells. 6. Overhead analysis Given the parameters above, intro circuit machines have an overhead of 11 padding cells, and rendezvous circuit machines have an overhead of 4 cpadding ells. . This means that for every intro and rendezvous circuit there will be an overhead of 15 padding cells in average, which is about 7.5kb. In the PrivCount paper [1] we learn that the Tor network sees about 12 million successful descriptor fetches per day. We can use this figure to assume that the Tor network also sees about 12 million intro and rendezvous circuits per day. Given the 7.5kb overhead of each of these circuits, we get that our padding machines infer an additional 94GB overhead per day on the network, which is about 3.9GB per hour. XXX Isn't this kinda intense????? Using the graphs from metrics we see that the Tor network has total capacity of 300 Gbit/s which is about 135000GB per hour, so 3.9GB per hour is not that much, but still... 7. Discussion 7.1. Alternative approaches These machines try to hide onion service client-side circuits by obfuscating their looks. This is a reasonable approach, but if the resulting circuits look unlike any other Tor circuits, they would still be fingerprintable just by that fact. Another approach we could take is make normal client circuits look like onion service circuits, or just make normal clients establish fake onion service circuits periodically. The hope here is that the adversary won't be able to distinguish fake onion service circuits from real ones. This approach has not been taken yet, mainly because it requires additional WTF-PAD features and poses greater overhead risks. 7.2. Future work As discussed in [SCOPE], this proposal only aims to hide some very specific features of client-side onion service circuits. There is lots of work to be done here to see what other features can be used to distinguish such circuits, and also what other classifiers can be built using deep learning and whatnot. --- [0]: https://www.usenix.org/node/190967 https://blog.torproject.org/technical-summary-usenix-fingerprinting-paper [1]: "Understanding Tor Usage with Privacy-Preserving Measurement" by Akshaya Mani, T Wilson-Brown, Rob Jansen, Aaron Johnson, and Micah Sherr In Proceedings of the Internet Measurement Conference 2018 (IMC 2018). _______________________________________________ tor-dev mailing list tor-dev@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-dev