Everyone should have full duplex by now. So he has 200 mbit on a fast ethernet port.
Sent from my iPad > On 12 Oct 2016, at 14:20, Tristan <supersluet...@gmail.com> wrote: > > Remember, a relay has to download and upload as well, so your 100Mbps link > would really only be able to _relay_ at 50Mbps anyway. > > >> On Oct 12, 2016 4:17 AM, "Farid Joubbi" <jou...@kth.se> wrote: >> The hardware in your raspberry is way too weak to be able to push 100 Mbit/s. >> My guess is that Atlas will show somewhere just below 1 MByte for your relay. >> >> I have tried to find cost effective hardware for a relay that is able to >> push around 100 Mbit/s. All the options I have looked at turned out to be a >> bit too expensive for my taste (and wallet). Either the initial cost or the >> energy usage is too high for such hardware for my purposes. >> >> From: tor-relays <tor-relays-boun...@lists.torproject.org> on behalf of >> Volker Mink <volker.m...@gmx.de> >> Sent: 12 October 2016 09:09 >> To: tor-relays@lists.torproject.org >> Subject: Re: [tor-relays] RPi Relay Maximum Speed >> >> So the best would be to use two raspis or your old gaming-workstation - >> depends on the costs for energy >> >> Gesendet: Mittwoch, 12. Oktober 2016 um 07:55 Uhr >> Von: "Roman Mamedov" <r...@romanrm.net> >> An: Manny <fel...@posteo.de> >> Cc: "Tor relays" <tor-relays@lists.torproject.org> >> Betreff: Re: [tor-relays] RPi Relay Maximum Speed >> On Wed, 12 Oct 2016 07:18:56 +0200 >> Manny <fel...@posteo.de> wrote: >> >> > I have a 1gbit symmetric connection at home and would like to donate >> > 100mbit with my raspberry pi 3 model b. Since it has a 100mbit Network >> > Interface, I'm limited to that anyways. >> > >> > What Settings do I Need in my torcc to get the Maximum Speed? At the >> > Moment I entered 12 Mbytes - which Shows up at 96 mb/s in Arm - is that >> > correct and my understanding of things is just the opposite? >> > Max Speed, I think, should be 12.7mb/s for a 100mbit Connection? >> >> mb is not a thing that exists; >> Mb is megabits: https://en.wikipedia.org/wiki/Megabit >> MB is megabytes: https://en.wikipedia.org/wiki/Megabyte >> >> What you entered in torrc is currently correct. But since your board has a >> 100 >> Mbit interface anyway, it would be better if you just omit the bandwidth >> limit >> line entirely. >> >> Also, actually hit anything remotely close to 100 Mbit, you'll absolutely >> have >> to run two instances of Tor. The Raspberry Pi 3 has 4 CPU cores, but each >> core >> on its own is not very fast. One copy of Tor only uses about 1 to 1.3 cores, >> so to fully utilize your hardware you need more than one. Ideally you'd set >> up >> four, but the Tor network will only accept two running from the same IPv4 >> address. It appears that these days there's a built-in script for that, see >> "man tor-instance-create". >> >> -- >> With respect, >> Roman >> _______________________________________________ >> tor-relays mailing list >> tor-relays@lists.torproject.org >> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays >> >> _______________________________________________ >> tor-relays mailing list >> tor-relays@lists.torproject.org >> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays >> > _______________________________________________ > tor-relays mailing list > tor-relays@lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
