Hi John, I require the redacted logs to be able to help at all.
On Wed, Jan 17, 2018 at 6:32 AM, John D. McDonnell <mcdon...@pcam.org> wrote: > Logged back in to check on it again this morning, and nyx is back to not > displaying any connections on the 2nd page. > > -- > John McDonnell > > -----Original Message----- > From: John D. McDonnell > Sent: Tuesday, January 16, 2018 9:25 PM > To: 'tor-relays@lists.torproject.org' <tor-relays@lists.torproject.org> > Subject: RE: [tor-relays] nyx no connections shown > > Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server > and nyx is working properly again. I'm thinking something was hanging in the > background or something that the reboot fixed, though I'm not sure what it > could have been. (Python and nyx are still the same versions, so I'm thinking > my updates didn't fix it but the reboot fixed whatever was hung in the > background. Maybe I'll check on my other relay to see if I can figure out > what specifically is causing it to not show connections.) > > -- > John McDonnell > > -----Original Message----- > From: John D. McDonnell > Sent: Tuesday, January 16, 2018 8:02 PM > To: 'tor-relays@lists.torproject.org' <tor-relays@lists.torproject.org> > Subject: RE: [tor-relays] nyx no connections shown > > Nyx was working fine until sometime last week when I had the same issue where > the connection page was suddenly blank. It came back a while later but then > went blank again. I just checked again and the connections page is still > coming up as blank. I'm also on FreeBSD running tor 0.3.1.9. > > FreeBSD 11.1-RELEASE-p4 > tor-0.3.1.9_1 > python27-2.7.14_1 > py27-nyx-2.0.4 > > I'm not sure when exactly I noticed the connections page started showing up > as blank as I usually only spot check the first page and maybe check the > notices.log file. > > I'm going to check for updates and then see what happens after. > > -- > John McDonnell > > -----Original Message----- > From: tor-relays [mailto:tor-relays-boun...@lists.torproject.org] On Behalf > Of TorGate > Sent: Monday, January 15, 2018 7:14 PM > To: tor-relays@lists.torproject.org > Subject: Re: [tor-relays] nyx no connections shown > > Thank you, its working :-) > But can i also show connections ? > > Steffen > > > > > > Am 15.01.2018 um 23:49 schrieb Damian Johnson <ata...@torproject.org > <mailto:ata...@torproject.org> >: > > Thanks Arisbe! This is useful. > >> 1) nyx is way slow to start up. Sometimes taking 20 seconds to come >> visible. The contacts page (page 2) does come up eventually but sometimes >> takes 10 minutes; > > > Weird. Nyx should be quicker in that respect than the old arm codebase. > Please run 'nyx --debug' and send me the debug log, minus anything you think > is sensitive. > >> 2) the inbound and outbound connections on page two are listed by IP only >> and not sorted by inbound/outbound; > > > Not sure I follow. Is this purely a sorting issue or are inbound/outbound not > properly labeled? This is something a screenshot might help with. > >> 3) IP addresses do not have country identification but rather all just have >> (??); > > > Hopefully the debug log will help with this too. This should be coming from > tor. > >> 4) nyx rejects some of the options in nyxrc > > > Yup, the nyxrc options are different from the old armrc. They're listed on... > > https://nyx.torproject.org/#configuration > <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0> > >> 5) There is no man page for nyx. > > > Actually, there is. > > https://gitweb.torproject.org/nyx.git/tree/nyx.1 > <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0> > > > Arm attempted to guess where to install it when you ran 'python setup.py > install' but doing so caused problems. Unfortunately the path man pages are > located at varies by the platform so I now leave it up to package managers > (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain > point right now - a package will hopefully be available for those soonish. > > > Cheers! -Damian > > _______________________________________________ > tor-relays mailing list > tor-relays@lists.torproject.org <mailto:tor-relays@lists.torproject.org> > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays > > > > > Penn Cambria School District > > This e-mail and any files transmitted with it are confidential and intended > only for the person or entity to which it is addressed. If you have received > this email in error, please notify the sender immediately via email and > delete this email along with any attachments from your system. Any > unauthorized or improper disclosure, copying, distribution, or use of the > contents of this e-mail and attached documents is strictly prohibited. The > views and opinions of this email or attachments are reflections of the author > and are not necessarily the views and opinions of Penn Cambria School > District. We do not accept responsibility or liability for any loss or damage > from the receipt of this email, its use, or for any errors or omissions. > > www.pcam.org<http://www.pcam.org> > > _______________________________________________ > tor-relays mailing list > tor-relays@lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
