Hi Станислав

You have two relays running at the same IP. Your IP and relays seem
visible to the network:

armik CE5ED345398CC02D573347C2F238F80B18E680EE
178.140.230.147,broadband-178-140-230-147.ip.moscow.rt.ru,443,80
Fast    Run     V2Dir   Valid   bw=9290
Fast            V2Dir   Valid
Fast    Run     V2Dir   Valid
Fast            V2Dir   Valid   bw=10200
Fast            V2Dir   Valid
                V2Dir   Valid
                V2Dir   Valid
        Run     V2Dir   Valid
Fast            V2Dir   Valid   bw=7890

armik1 0C0388BC552D7AC903F49390A40244FD3FFF44A2
178.140.230.147,broadband-178-140-230-147.ip.moscow.rt.ru,9001,9030
Fast    Run     V2Dir   Valid   bw=4650
Fast    Run     V2Dir   Valid
Fast    Run     V2Dir   Valid
Fast    Run     V2Dir   Valid   bw=3200
Fast    Run     V2Dir   Valid
!Fast   Run     V2Dir   Valid
Fast    Run     V2Dir   Valid   bw=5960
!Fast   Run     V2Dir   Valid
Fast    Run     V2Dir   Valid   bw=6670
Fast    Run     V2Dir   Valid   bw=4650         bwauth=moria1

Am 14.05.2020 um 19:18 schrieb Станислав:
hi, I still don’t understand why the relays constantly go offline for no
apparent reason

May-be there are indications:

On 4 May 2020, at 20:51, Станислав <armik...@gmail.com
<mailto:armik...@gmail.com>> wrote:

hi, strange but the relay constantly spontaneously goes offline after 3,
4 hours again online in the logs no errors other than this (Failing
because we have 4063 connections already. Please read doc / TUNING for
guidance. [over 16000001 similar message (s) suppressed in last 21600 seconds)

and

TCP: request_sock_TCP: Possible SYN flooding on port 80. Sending cookies.  Check
SNMP counters.
what it can mean? also my 2 relays go offline for a few hours once a day, then
are restored.


Port 80 is your DIR port.

If you suffer under potential overload or not enough resources (by what
ever reason) you can reduce.

Run only one relay with OR port only and strict DOS settings. Then wait
a week if everything works. Wait an other week. If still everything is
running well add the DIR port again and wait and wait. Add the second
relay in the same way and finally relax DOS settings.

When ever the relay(s) become unstable go one step back.

This is a recommendation but there might better ways to go.

Good luck!


--
Cheers, Felix
_______________________________________________
tor-relays mailing list
tor-relays@lists.torproject.org
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays

Reply via email to