Hi, I installed openwrt on wt3020h router. Plugged LAN port to my wireles modem. Assuming that after installing the tor and setting up config files i was assuming i will be able to surf through tor. But even dns resolving is not working when i connected to the openwrt ssid. What am i doing wrong?
Below is the config files: http://pastebin.com/b6dMDJyt Or can read here: ==> config/dhcp <== config dnsmasq option domainneeded '1' option boguspriv '1' option filterwin2k '0' option localise_queries '1' option rebind_protection '1' option rebind_localhost '1' option local '/lan/' option domain 'lan' option expandhosts '1' option nonegcache '0' option authoritative '1' option readethers '1' option leasefile '/tmp/dhcp.leases' option resolvfile '/tmp/resolv.conf.auto' config dhcp 'lan' option interface 'lan' option start '100' option limit '150' option leasetime '12h' option dhcpv6 'server' option ra 'server' config dhcp 'wan' option interface 'wan' option ignore '1' config odhcpd 'odhcpd' option maindhcp '0' option leasefile '/tmp/hosts/odhcpd' option leasetrigger '/usr/sbin/odhcpd-update' # added manually config dhcp 'transtor' option start '100' option leasetime '12h' option limit '150' option interface 'transtor' ==> config/dropbear <== config dropbear option PasswordAuth 'on' option Port '22' config dropbear option Port '22' option PasswordAuth 'on' option RootPasswordAuth 'on' option GatewayPorts 'off' ==> config/firewall <== config defaults option syn_flood 1 option input ACCEPT option output ACCEPT option forward REJECT # Uncomment this line to disable ipv6 rules # option disable_ipv6 1 config zone option name lan list network 'lan' option input ACCEPT option output ACCEPT option forward ACCEPT config zone option name wan list network 'wan' list network 'wan6' option input REJECT option output ACCEPT option forward REJECT option masq 1 option mtu_fix 1 config forwarding option src lan option dest wan # We need to accept udp packets on port 68, # see https://dev.openwrt.org/ticket/4108 config rule option name Allow-DHCP-Renew option src wan option proto udp option dest_port 68 option target ACCEPT option family ipv4 # Allow IPv4 ping config rule option name Allow-Ping option src wan option proto icmp option icmp_type echo-request option family ipv4 option target ACCEPT # Allow DHCPv6 replies # see https://dev.openwrt.org/ticket/10381 config rule option name Allow-DHCPv6 option src wan option proto udp option src_ip fe80::/10 option src_port 547 option dest_ip fe80::/10 option dest_port 546 option family ipv6 option target ACCEPT # Allow essential incoming IPv6 ICMP traffic config rule option name Allow-ICMPv6-Input option src wan option proto icmp list icmp_type echo-request list icmp_type echo-reply list icmp_type destination-unreachable list icmp_type packet-too-big list icmp_type time-exceeded list icmp_type bad-header list icmp_type unknown-header-type list icmp_type router-solicitation list icmp_type neighbour-solicitation list icmp_type router-advertisement list icmp_type neighbour-advertisement option limit 1000/sec option family ipv6 option target ACCEPT # Allow essential forwarded IPv6 ICMP traffic config rule option name Allow-ICMPv6-Forward option src wan option dest * option proto icmp list icmp_type echo-request list icmp_type echo-reply list icmp_type destination-unreachable list icmp_type packet-too-big list icmp_type time-exceeded list icmp_type bad-header list icmp_type unknown-header-type option limit 1000/sec option family ipv6 option target ACCEPT # include a file with users custom iptables rules config include option path /etc/firewall.user ### EXAMPLE CONFIG SECTIONS # do not allow a specific ip to access wan #config rule # option src lan # option src_ip 192.168.45.2 # option dest wan # option proto tcp # option target REJECT # block a specific mac on wan #config rule # option dest wan # option src_mac 00:11:22:33:44:66 # option target REJECT # block incoming ICMP traffic on a zone #config rule # option src lan # option proto ICMP # option target DROP # port redirect port coming in on wan to lan #config redirect # option src wan # option src_dport 80 # option dest lan # option dest_ip 192.168.16.235 # option dest_port 80 # option proto tcp # port redirect of remapped ssh port (22001) on wan #config redirect # option src wan # option src_dport 22001 # option dest lan # option dest_port 22 # option proto tcp # allow IPsec/ESP and ISAKMP passthrough #config rule # option src wan # option dest lan # option protocol esp # option target ACCEPT #config rule # option src wan # option dest lan # option src_port 500 # option dest_port 500 # option proto udp # option target ACCEPT ### FULL CONFIG SECTIONS #config rule # option src lan # option src_ip 192.168.45.2 # option src_mac 00:11:22:33:44:55 # option src_port 80 # option dest wan # option dest_ip 194.25.2.129 # option dest_port 120 # option proto tcp # option target REJECT #config redirect # option src lan # option src_ip 192.168.45.2 # option src_mac 00:11:22:33:44:55 # option src_port 1024 # option src_dport 80 # option dest_ip 194.25.2.129 # option dest_port 120 # option proto tcp #added manually #config zone # option name 'tor' ## option input 'ACCEPT' # option forward 'REJECT' # option output 'ACCEPT' # option network 'tor' #Allow Tor Bridge incoming for censored users config rule option src wan option proto tcp option dest_port 443 option target ACCEPT config zone option name transtor option input REJECT option output ACCEPT option forward REJECT option syn_flood 1 option conntrack 1 #this setting is mandatory # Allow Transparent clients the ability to DHCP an address # XXX TODO: Audit this to ensure it doesn't leak UDP port 67 to the net! config rule option name 'Allow-Tor-DHCP' option src transtor option proto udp option dest_port 67 option target ACCEPT # Tor transparent-proxy-port (set in /etc/tor/torrc) config rule option name 'Allow-Tor-Transparent' option src transtor option proto tcp option dest_port 9040 option target ACCEPT # Tor DNS-proxy-port (set in /etc/tor/torrc) config rule option name 'Allow-Tor-DNS' option src transtor option proto udp option dest_port 9053 option target ACCEPT ==> config/luci <== config core 'main' option lang 'auto' option mediaurlbase '/luci-static/openwrt.org' option resourcebase '/luci-static/resources' config extern 'flash_keep' option uci '/etc/config/' option dropbear '/etc/dropbear/' option openvpn '/etc/openvpn/' option passwd '/etc/passwd' option opkg '/etc/opkg.conf' option firewall '/etc/firewall.user' option uploads '/lib/uci/upload/' config internal 'languages' option en 'English' config internal 'sauth' option sessionpath '/tmp/luci-sessions' option sessiontime '3600' config internal 'ccache' option enable '1' config internal 'themes' option Bootstrap '/luci-static/bootstrap' ==> config/network <== config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd80:0fb3:b4e3::/48' config interface 'lan' option ifname 'eth0.1' option force_link '1' option macaddr '20:28:18:a0:a8:fe' option type 'bridge' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' option ip6assign '60' # added manually # option conntrack '1' # option delegate '0' # option dns '192.168.1.1' ## option defaultroute 0 ## option peerdns 0 config interface 'wan' option ifname 'eth0.2' option force_link '1' option macaddr '20:28:18:a0:a8:ff' option proto 'dhcp' config interface 'wan6' option ifname 'eth0.2' option proto 'dhcpv6' config switch option name 'switch0' option reset '1' option enable_vlan '1' config switch_vlan option device 'switch0' option vlan '1' option ports '1 2 3 4 6t' config switch_vlan option device 'switch0' option vlan '2' option ports '0 6t' # added manually config interface transtor option ifname "wlan0" option proto static option ipaddr 192.168.2.1 option netmask 255.255.255.0 ==> config/system <== config system option hostname 'OpenWrt' option timezone 'UTC' config timeserver 'ntp' list server '0.openwrt.pool.ntp.org' list server '1.openwrt.pool.ntp.org' list server '2.openwrt.pool.ntp.org' list server '3.openwrt.pool.ntp.org' option enabled '1' option enable_server '0' config led 'led_power' option name 'power' option sysfs 'nexx:blue:power' option default '0' ==> config/ucitrack <== config network option init network list affects dhcp list affects radvd config wireless list affects network config firewall option init firewall list affects luci-splash list affects qos list affects miniupnpd config olsr option init olsrd config dhcp option init dnsmasq config dropbear option init dropbear config httpd option init httpd config fstab option init fstab config qos option init qos config system option init led list affects luci_statistics config luci_splash option init luci_splash config upnpd option init miniupnpd config ntpclient option init ntpclient config samba option init samba config tinyproxy option init tinyproxy config 6relayd option init 6relayd ==> config/uhttpd <== config uhttpd 'main' list listen_http '0.0.0.0:80' list listen_http '[::]:80' list listen_https '0.0.0.0:443' list listen_https '[::]:443' option home '/www' option rfc1918_filter '1' option max_requests '3' option max_connections '100' option cert '/etc/uhttpd.crt' option key '/etc/uhttpd.key' option cgi_prefix '/cgi-bin' option script_timeout '60' option network_timeout '30' option http_keepalive '20' option tcp_keepalive '1' option ubus_prefix '/ubus' config cert 'px5g' option days '730' option bits '1024' option country 'DE' option state 'Berlin' option location 'Berlin' option commonname 'OpenWrt' ==> config/wireless <== config wifi-device 'radio0' option type 'mac80211' option channel '11' option hwmode '11g' option path '10180000.wmac' option htmode 'HT20' config wifi-iface option device 'radio0' option network 'transtor' option mode 'ap' option encryption 'none' option ssid 'OnionWRT' ==> config/wireless.bak <== config wifi-device radio0 option type mac80211 option channel 11 option hwmode 11g option path '10180000.wmac' option htmode HT20 config wifi-iface option device radio0 option network lan option mode ap option ssid OpenWrt option encryption none I installed tor and running. I can see that the ports 9040 and 9053 is listened. So will be happy if anyone had such an openwrt experience helps. -- Oğuz Yarımtepe http://about.me/oguzy -- tor-talk mailing list - [email protected] To unsubscribe or change other settings go to https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-talk
