Hi, I am running raspberry pi 1 and raspberry pi 2 Tor relays.
Middle relay works pretty well, see https://atlas.torproject.org/#details/E7FF7144EA49AAE291B48E354C80B0CEE74A706E 2.65 MB/s without any problems. However, my exit does not work very well. I have to limit it to BandwidthRate 256 KB # Throttle traffic to 256 KB/s BandwidthBurst 1024 KB # But allow bursts up to 1024 KB/s Otherwise it will freeze to some unknown problem. Without low traffic limits it runs only few days and totally freezes after that: I am not even able to get SSH connection there. The traffic limits seems to help. I have some documentation here: https://github.com/juhanurmi/exitnode These steps may be useful: #Remove useless packages, see remove.sh on github #REMOVES THE DESKTOP TOO! sudo bash remove.sh #Make sure everything is updated sudo apt-get update && sudo apt-get upgrade sudo rpi-update #Low entropy may be a problem, install haveged sudo apt-get install haveged #Install Tor, remember check torrc sudo apt-get install tor #You can modify iptables and sysctl settings, see github sudo cp sysctl.conf /etc/sysctl.conf sudo cp rules.v4 /etc/iptables/rules.v4 sudo apt-get install iptables-persistent sudo modprobe ip_conntrack sudo echo "ip_conntrack" >> /etc/modules sudo service iptables-persistent restart sudo sysctl -p /etc/sysctl.conf sudo service tor restart # After installation may be good idea to sudo reboot This is just my test case. Maybe someone knows more details? :) -Juha On Sat, Nov 14, 2015 at 10:32 AM, Flipchan <flipc...@riseup.net> wrote: > Have anyone done this with a raspberrypi > ? > I have found some tutorials > http://m.instructables.com/id/Raspberry-Pi-Tor-relay/?ALLSTEPS and stuff > , anyhow email back IF anyone is running a tor relay on a raspberry pi > -- > Sincerly Flipchan > -- > tor-talk mailing list - tor-talk@lists.torproject.org > To unsubscribe or change other settings go to > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-talk > -- tor-talk mailing list - tor-talk@lists.torproject.org To unsubscribe or change other settings go to https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-talk