This bug was fixed in the package systemd - 204-5ubuntu20.4
---------------
systemd (204-5ubuntu20.4) trusty-proposed; urgency=medium
* Add HP ProLiant m800 Server Cartridge power control support. The cartridge
uses gpio_keys.12 to emulate shutdown. (LP: #1347776)
-- Manoj Iyer <manoj.i...@canonical.com> Mon, 21 Jul 2014 17:58:06 -0500
** Changed in: systemd (Ubuntu Trusty)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1347776
Title:
shutdown trigger on gpio_keys.X for armhf hardware
Status in systemd:
Confirmed
Status in “systemd” package in Ubuntu:
Fix Released
Status in “systemd” source package in Trusty:
Fix Released
Status in “systemd” source package in Utopic:
Fix Released
Bug description:
Some ARM board uses GPIO gpio_key.12 for power control (key=116). The
proposed patch adds entry to logind's 70-power-switch.rules to
initiate soft shutdown of the cartridge from ilo.
Here is the udevadm output for /dev/input/event0
sudo udevadm info --query=all --name=/dev/input/event0 --attribute-
walk
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/soc.3/gpio_keys.12/input/input0/event0':
KERNEL=="event0"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/soc.3/gpio_keys.12/input/input0':
KERNELS=="input0"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="gpio_keys.12"
ATTRS{phys}=="gpio-keys/input0"
ATTRS{uniq}==""
ATTRS{properties}=="0"
looking at parent device '/devices/soc.3/gpio_keys.12':
KERNELS=="gpio_keys.12"
SUBSYSTEMS=="platform"
DRIVERS=="gpio-keys"
ATTRS{keys}=="116"
ATTRS{switches}==""
ATTRS{disabled_keys}==""
ATTRS{disabled_switches}==""
looking at parent device '/devices/soc.3':
KERNELS=="soc.3"
SUBSYSTEMS=="platform"
DRIVERS==""
Regarding the possibility of gpio_key.12 being used by other systems
to map to some other trigger, I put in the check that the gpio_key.12
is associated with power control (keys=116). '116' is supposedly linux
generic power control in DTS. There is no uniq idSystem or idVendor
for device /dev/input/event0 as you can see from udevadm output,
therefore I tried to use the best available combination as a safety
check. This patch will enable power control for any system vendor
(Other than the one the patch in intended for) that describes in DTS,
the trigger gpio_key.12 as power control (116).
SRU Request
==========
[Impact]
* User won't be able to initiate a soft shutdown from the chassis
manager.
[Test Case]
* To reproduce this bug, initiate a soft shutdown from the chassis manager,
for example from ilo you could do
<ilo> set node power off shutdown <node number>
[Test Result]
== BEFORE PATCH ==
$ cat /lib/udev/rules.d/70-power-switch.rules
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
ACTION=="remove", GOTO="power_switch_end"
SUBSYSTEM=="input", KERNEL=="event*", SUBSYSTEMS=="acpi", TAG+="power-switch"
SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="thinkpad_acpi",
TAG+="power-switch"
LABEL="power_switch_end"
$
</>hpiLO-> set node power off shutdown c3n2
c3: #Cartridge 3
c3n2: #Node 2 Shutting node down gracefully
hpiLO-> show node list
Slot ID Proc Manufacturer Architecture Memory Power Health
---- ----- ---------------------- -------------------- ------ ----- ------
3 c3n1 **** ARM Architecture 8 GB On OK
3 c3n2 **** ARM Architecture 8 GB On OK
3 c3n3 **** ARM Architecture 8 GB On OK
3 c3n4 **** ARM Architecture 8 GB Off OK
hpiLO->
== AFTER PATCH ==
hpiLO-> set node power off shutdown c3n1
c3: #Cartridge 3
c3n1: #Node 1 Shutting node down gracefully
hpiLO-> show node list
Slot ID Proc Manufacturer Architecture Memory Power Health
---- ----- ---------------------- -------------------- ------ ----- ------
3 c3n1 **** ARM Architecture 8 GB Off OK
3 c3n2 **** ARM Architecture 8 GB On OK
3 c3n3 **** ARM Architecture 8 GB On OK
3 c3n4 **** ARM Architecture 8 GB Off OK
hpiLO->
[Regression Potential]
None.
Note: Regarding the possibility of gpio_key.12 being used by other systems to
map to some other trigger, I put in the check that the gpio_key.12 is
associated with power control (keys=116). '116' is supposedly linux generic
power control in DTS.
To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1347776/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
