This is the systemd debdiff. With a local build of that, and a local rebuild of d-i, and PXE-booting the resulting netboot.tar.gz I now get a 70-persistent-net.rules copied to /target/etc/udev/rules.d/.
I can't upload this yet as bug 1371403 is the current SRU in trusty- proposed. This either needs to get verified or removed from -proposed. ** Patch added: "debdiff for systemd" https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1537136/+attachment/4556284/+files/systemd.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1537136 Title: ISST-LTE: no network after install due to interface order change Status in debian-installer package in Ubuntu: Invalid Status in systemd package in Ubuntu: Invalid Status in debian-installer source package in Trusty: Triaged Status in systemd source package in Trusty: In Progress Bug description: == Comment: #0 - Chanh H. Nguyen <chngu...@us.ibm.com> - 2015-12-10 20:32:29 == We use the network to install Ubuntu 14.04.4 version. The installation is successful but then there is no network after system reboot in post install. Checking the network and I saw the order of interface are changed. This is causing no network at all. There is 2 cards (Houston 4ports & Mellanox 2 ports). We are using the Mellanox interface for this installation. At the installation menu, we select this interface eth2 (mellanox card) ??????????????????????? [!!] Configure the network ???????????????????????? ? ? ? Your system has multiple network interfaces. Choose the one to use as ? ? the primary network interface during the installation. If possible, ? ? the first connected network interface found has been selected. ? ? ? ? Primary network interface: ? ? ? ? eth0: Emulex Corporation OneConnect NIC (Lancer) ? ? eth1: Emulex Corporation OneConnect NIC (Lancer) ? ? eth2: Mellanox Technologies MT27500 Family [ConnectX-3] ? ? eth3: Mellanox Technologies MT27500 Family [ConnectX-3] ? ? eth4: Emulex Corporation OneConnect NIC (Lancer) ? ? eth5: Emulex Corporation OneConnect NIC (Lancer) ? ? ? ? <Go Back> ? ? ? ??????????????????????????????????????????????????????????????????????????? After install, root@monklp3:~# ifconfig eth2 Link encap:Ethernet HWaddr 00:00:c9:d1:be:28 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2368 (2.3 KB) TX bytes:2368 (2.3 KB) root@monklp3:~# ifconfig -a|grep eth eth0 Link encap:Ethernet HWaddr 00:00:c9:d1:be:26 eth1 Link encap:Ethernet HWaddr 00:00:c9:d1:be:27 eth2 Link encap:Ethernet HWaddr 00:00:c9:d1:be:28 eth3 Link encap:Ethernet HWaddr 00:02:c9:b7:60:b0 eth4 Link encap:Ethernet HWaddr 00:02:c9:b7:60:b1 eth5 Link encap:Ethernet HWaddr 00:00:c9:d1:be:29 root@monklp3:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth2 iface eth2 inet dhcp root@monklp3:~# dmesg |grep "eth" [ 0.950725] ibmveth: IBM Power Virtual Ethernet Driver 1.05 [ 0.950735] ehea: IBM eHEA ethernet device driver (Release EHEA_0107) [ 9.810472] mlx4_en: eth3: Link Up [ 40.554271] be2net 0001:80:00.2 eth2: Link is Down [ 40.560738] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready root@monklp3:~# The mellanox inteface is now on eth3 but on the /etc/network/interface file, it is set on eth2. == Comment: #19 - Erwan Prioul <erwan.pri...@fr.ibm.com> - 2016-01-21 06:50:41 == This makes me think it's related to https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1473542 Canonical: please backport to 14.04.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1537136/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
