** Changed in: systemd (Ubuntu) Importance: Undecided => Medium ** Changed in: systemd (Ubuntu Xenial) Importance: Undecided => Medium
-- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1593379 Title: systemd 229-4ubuntu6 ignores net.ifnames=0 on USB or /etc/udev/rules.d/80-net-setup-link.rules being a /dev/null symlink Status in systemd package in Ubuntu: Fix Released Status in systemd source package in Xenial: Fix Committed Status in systemd package in Debian: Fix Released Bug description: Description: Ubuntu 16.04 LTS Release: 16.04 The upgrade to systemd/udev 229-4ubuntu6 breaks net.ifnames=0 for USB devices. It appears the regression is here: * Set MAC based name for USB network interfaces only for universally administered (i. e. stable) MACs, not for locally administered (i. e. randomly generated) ones. Drop /lib/systemd/network/90-mac-for-usb.link (as link files don't currently support globs for MACAddress=) and replace with an udev rule in /lib/udev/rules.d/73-special-net-names.rules. (Closes: #812575, LP: #1574483) As Raspberry Pi's use eth0 via USB, this breaks running systems. Before: ii systemd 229-4ubuntu4 armhf system and service manager ii udev 229-4ubuntu4 armhf /dev/ and hotplug management daem 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether b8:27:eb:16:39:e9 brd ff:ff:ff:ff:ff:ff After: ii systemd 229-4ubuntu6 armhf system and service manager ii udev 229-4ubuntu6 armhf /dev/ and hotplug management daemon 3: enxb827eb1639e9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether b8:27:eb:16:39:e9 brd ff:ff:ff:ff:ff:ff cat /proc/cmdline dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa01041 bcm2709.serial=0x37b38253 smsc95xx.macaddr=B8:27:EB:B3:82:53 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait With the default interfaces configuration, all networking is lost on reboot after upgrade. SRU TEST CASE ============= * Boot with "net.ifnames=0" on the kernel command line, and connect an USB ethernet device. It will still be called enxDEADBEEF with current xenial. With the -proposed version it will instead keep the kernel name, like "usb0" as intended. * Do "sudo ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules" (the other documented way to disable ifnames) and do the above connect/name check test again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1593379/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp