I read this full issue report and replies and it seems I am experienced an analogous problem. Should I report the details of my case here or open a new issue?
Here are few initial information: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial uname -a: Linux mangue 4.4.0-42-generic #62-Ubuntu SMP Fri Oct 7 23:11:45 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux lsusb: Bus 005 Device 025: ID 04e8:3301 Samsung Electronics Co., Ltd ML-1660 Series /var/log/syslog: (the block below keeps popping out continuously) Oct 10 20:11:27 mangue kernel: [ 1594.728192] usb 5-2: reset full-speed USB device number 40 using uhci_hcd Oct 10 20:11:27 mangue kernel: [ 1594.885385] usb 5-2: USB disconnect, device number 40 Oct 10 20:11:27 mangue kernel: [ 1594.885804] usblp1: removed Oct 10 20:11:27 mangue udev-configure-printer[6009]: remove /devices/pci0000:00/0000:00:1d.0/usb5/5-2 Oct 10 20:11:27 mangue kernel: [ 1595.000098] usb 5-2: new full-speed USB device number 41 using uhci_hcd Oct 10 20:11:28 mangue kernel: [ 1595.169199] usb 5-2: New USB device found, idVendor=04e8, idProduct=3301 Oct 10 20:11:28 mangue kernel: [ 1595.169209] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 10 20:11:28 mangue kernel: [ 1595.169216] usb 5-2: Product: ML-1660 Series Oct 10 20:11:28 mangue kernel: [ 1595.169222] usb 5-2: Manufacturer: Samsung Electronics Co., Ltd. Oct 10 20:11:28 mangue kernel: [ 1595.169227] usb 5-2: SerialNumber: Z5ASBDAZ809914N. Oct 10 20:11:28 mangue kernel: [ 1595.176325] usblp 5-2:1.0: usblp1: USB Bidirectional printer dev 41 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301 Oct 10 20:11:28 mangue mtp-probe: checking bus 5, device 41: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2" Oct 10 20:11:28 mangue mtp-probe: bus: 5, device: 41 was not an MTP device Oct 10 20:11:28 mangue udev-configure-printer[5977]: no corresponding CUPS device found Oct 10 20:11:28 mangue systemd[1]: Started Automatic USB/Bluetooth printer setup (-devices-pci0000:00-0000:00:1d.0-usb5-5\x2d2). Oct 10 20:11:28 mangue systemd[1]: printer.target: Unit not needed anymore. Stopping. Oct 10 20:11:28 mangue systemd[1]: Stopped target Printer. Oct 10 20:11:28 mangue systemd[1]: Starting Automatic USB/Bluetooth printer setup (-devices-pci0000:00-0000:00:1d.0-usb5-5\x2d2)... Oct 10 20:11:28 mangue systemd[1]: Reached target Printer. Oct 10 20:11:28 mangue udev-configure-printer[6029]: add /devices/pci0000:00/0000:00:1d.0/usb5/5-2 Oct 10 20:11:28 mangue udev-configure-printer[6029]: device devpath is /devices/pci0000:00/0000:00:1d.0/usb5/5-2 Oct 10 20:11:28 mangue udev-configure-printer[6029]: MFG:Samsung MDL:ML-1660 Series SERN:- serial:Z5ASBDAZ809914N. I am using Unified Linux Driver, from Samsung's HP, since the printer was not able to print without it. After installing it, the printer was automatically discovered and I could print one page. After that, the printer goes automatically to disabled state. Re-enabling it does not work, since it is disable few seconds later. The printer used to work normally up to last week, when my computer was still running Ubuntu 14.04 (and Samsung Linux Driver). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1495971 Title: Samsung ML-1250 prints only first job and then disconnects Status in cups package in Ubuntu: New Status in linux package in Ubuntu: Confirmed Bug description: We have: lsusb Bus 004 Device 009: ID 04e8:300e Samsung Electronics Co., Ltd Laser Printer Just connected printer and started to print first job: tail -f /var/log/syslog Sep 15 14:50:18 desktop udev-configure-printer: URI matches without serial number: usb://Samsung/ML-1250 Sep 15 14:50:18 desktop udev-configure-printer: No serial number URI matches so using those without Sep 15 14:50:18 desktop udev-configure-printer: URI of detected printer: usb://Samsung/ML-1250, normalized: samsung ml 1250 Sep 15 14:50:18 desktop udev-configure-printer: URI of print queue: usb://HP/LaserJet%201200?serial=00CNCF203187, normalized: laserjet 1200 serial 00cncf203187 Sep 15 14:50:18 desktop udev-configure-printer: About to add queue for usb://Samsung/ML-1250 Sep 15 14:50:20 desktop udev-add-printer: add_queue: URIs=['usb://Samsung/ML-1250'] Sep 15 14:50:20 desktop udev-add-printer: D-Bus method call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.NewPrinterNotification was not provided by any .service files Sep 15 14:50:23 desktop udev-add-printer: PPD: foomatic-db-compressed-ppds:0/ppd/foomatic-ppd/Samsung-ML-1250-pxlmono.ppd; Status: 0 Sep 15 14:50:24 desktop colord: Profile added: ML-1250-Gray.. Sep 15 14:50:24 desktop colord: Device added: cups-ML-1250 Sep 15 14:53:51 desktop kernel: [22676.268686] usblp0: removed Sep 15 14:54:03 desktop kernel: [22688.117044] usblp 4-2:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E Sep 15 14:54:03 desktop kernel: [22688.117121] usblp0: removed Sep 15 14:54:03 desktop kernel: [22688.228040] usb 4-2: reset full-speed USB device number 4 using uhci_hcd Sep 15 14:54:03 desktop kernel: [22688.348039] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:03 desktop kernel: [22688.572040] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:04 desktop kernel: [22688.788044] usb 4-2: reset full-speed USB device number 4 using uhci_hcd Sep 15 14:54:04 desktop kernel: [22688.908039] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:04 desktop kernel: [22689.132029] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:04 desktop kernel: [22689.348038] usb 4-2: reset full-speed USB device number 4 using uhci_hcd Sep 15 14:54:05 desktop kernel: [22689.756029] usb 4-2: device not accepting address 4, error -71 Sep 15 14:54:05 desktop kernel: [22689.868029] usb 4-2: reset full-speed USB device number 4 using uhci_hcd Sep 15 14:54:05 desktop kernel: [22690.276040] usb 4-2: device not accepting address 4, error -71 Sep 15 14:54:05 desktop kernel: [22690.276130] usblp: can't set desired altsetting 0 on interface 0 Sep 15 14:54:05 desktop kernel: [22690.276265] usb 4-2: USB disconnect, device number 4 Sep 15 14:54:05 desktop udev-configure-printer: remove /devices/pci0000:00/0000:00:1a.1/usb4/4-2 Sep 15 14:54:05 desktop udev-configure-printer: URI of detected printer: usb://Samsung/ML-1250, normalized: samsung ml 1250 Sep 15 14:54:05 desktop udev-configure-printer: URI of print queue: usb://HP/LaserJet%201200?serial=00CNCF203187, normalized: laserjet 1200 serial 00cncf203187 Sep 15 14:54:05 desktop udev-configure-printer: URI of print queue: usb://Samsung/ML-1250, normalized: samsung ml 1250 Sep 15 14:54:05 desktop udev-configure-printer: Queue ipp://localhost:631/printers/ML-1250 has matching device URI Sep 15 14:54:05 desktop udev-configure-printer: Disabled printer ipp://localhost:631/printers/ML-1250 as the corresponding device was unplugged or turned off Sep 15 14:54:05 desktop kernel: [22690.388029] usb 4-2: new full-speed USB device number 5 using uhci_hcd Sep 15 14:54:05 desktop kernel: [22690.508023] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:06 desktop kernel: [22690.732024] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:06 desktop kernel: [22690.948037] usb 4-2: new full-speed USB device number 6 using uhci_hcd Sep 15 14:54:06 desktop kernel: [22691.068035] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:06 desktop kernel: [22691.292039] usb 4-2: device descriptor read/64, error -71 Sep 15 14:54:06 desktop kernel: [22691.508031] usb 4-2: new full-speed USB device number 7 using uhci_hcd Sep 15 14:54:07 desktop kernel: [22691.916031] usb 4-2: device not accepting address 7, error -71 Sep 15 14:54:07 desktop kernel: [22692.028039] usb 4-2: new full-speed USB device number 8 using uhci_hcd Sep 15 14:54:07 desktop kernel: [22692.436036] usb 4-2: device not accepting address 8, error -71 Sep 15 14:54:07 desktop kernel: [22692.436071] usb usb4-port2: unable to enumerate USB device Sep 15 14:55:01 desktop CRON[6650]: (master) CMD (~/temp/ipv6save) Sep 15 14:55:04 desktop CRON[6649]: (CRON) info (No MTA installed, discarding output) So as we see it prints first job and then disconnects for some unknown reason. lsusb also confirms it: lsusb Bus 002 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub The only workaround is to turn off and on the printer. I've checked it on two different desktops with the same result. Also I've tried another cable but it not helped. Some additional info: Kubuntu/Xubuntu 14.04.3 LTS Linux 3.19.0-28 x86_64 Tried Samsung ML-1250 Foomatic/pxlmono recommended driver ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: udev 204-5ubuntu20.13 ProcVersionSignature: Ubuntu 3.19.0-28.30~14.04.1-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 CurrentDesktop: KDE CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied CustomUdevRuleFiles: 60-ssd-scheduler.rules Date: Tue Sep 15 15:12:00 2015 InstallationDate: Installed on 2014-04-01 (531 days ago) InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Daily amd64 (20140331) MachineType: Hewlett-Packard HP Compaq dc7800p Small Form Factor ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-28-generic root=UUID=a8420fcb-26e9-480c-8cb0-7d33d308db8c ro rootflags=subvol=@ quiet splash vt.handoff=7 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/21/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F1 v01.32 dmi.board.asset.tag: CZC81123H7 dmi.board.name: 0AA8h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC81123H7 dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786F1v01.32:bd07/21/2011:svnHewlett-Packard:pnHPCompaqdc7800pSmallFormFactor:pvr:rvnHewlett-Packard:rn0AA8h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc7800p Small Form Factor dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1495971/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
