Don't know what to say but now I'm discovered following when lj1018 is connected:
dmesg | grep error [ 1.816037] usb 2-6: device descriptor read/64, error -71 [ 2.044065] usb 2-6: device descriptor read/64, error -71 [ 2.388045] usb 2-6: device descriptor read/64, error -71 [ 2.616071] usb 2-6: device descriptor read/64, error -71 [ 3.248060] usb 2-6: device not accepting address 5, error -71 [ 3.776018] usb 2-6: device not accepting address 6, error -71 [ 20.036039] usb 7-2: device descriptor read/64, error -110 [ 35.252025] usb 7-2: device descriptor read/64, error -110 [ 50.580043] usb 7-2: device descriptor read/64, error -110 [ 65.796033] usb 7-2: device descriptor read/64, error -110 [ 71.033270] usb 7-2: device descriptor read/8, error -110 [ 76.157437] usb 7-2: device descriptor read/8, error -110 [ 81.393610] usb 7-2: device descriptor read/8, error -110 [ 86.513777] usb 7-2: device descriptor read/8, error -110 Is this hardware issue or not ? I tried different usb-ports with the same result. Running lsusb gives long thinking. ON/OFF printer helps but if reconnect it to another port it is also thinking long and not displaying printer at last. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/329898 Title: The HP 1018 printer not work out of the box if used non-US locale Status in HP Linux Imaging and Printing: Confirmed Status in Release Notes for Ubuntu: Won't Fix Status in “hplip” package in Ubuntu: Fix Released Status in “ibus” package in Ubuntu: Fix Released Status in “hplip” source package in Lucid: Won't Fix Status in “ibus” source package in Lucid: Invalid Status in “hplip” source package in Maverick: Won't Fix Status in “ibus” source package in Maverick: Won't Fix Bug description: This bug is continuation of the bug 217215. To avoid any problems related to attempts describe I decided to start with 'clean account'. (and created the new bug entry) Clean account means: 1) Remove hplip*, foo2zjs, footomatic package. 2) Remove any further files related to hp1018 find /usr/share -name "*1018*" ./foo2zjs/firmware/sihp1018.img ./ppd/hpijs/HP/hp_laserjet_1018-hpijs.ppd 3) Remove orphaned /usr/share/hplip directory After restarting the printer a system message appear pointing that new hardware had been installed and suggesting that hpijs package support the HP 1018 printer. I: - installed hpijs with depends - Ran Printer configure tool: a driver for HP 1018 hadn't been found - so I chose suggested HP 1015 driver - printer didn't react for send packages. To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/329898/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp