There is no intend here to block any fix for stable serie but in case that was not clear enough or if the SRU team didn't feel comfortable with hirsute lacking behind and I uploaded back the patches but I'm tagging the bug as 'block-proposed' instead which should be enough incensitive to sort out
** Tags added: block-proposed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1903048 Title: [SRU] Bluetooth won't activate on the pi 400 Status in bluez package in Ubuntu: Triaged Status in bluez source package in Hirsute: Triaged Bug description: [Impact] Without these patches, Bluetooth is inoperable on the recently released Raspberry Pi 400. [Test Case] * Boot the Ubuntu Desktop for Pi image on a Pi 400. * Start the Settings application and switch to the Bluetooth tab * Verify that Bluetooth is not enabled and attempting to activate it fails * sudo add-apt-repository ppa:waveform/pi-bluetooth * sudo apt update * sudo apt install bluez * sudo reboot * Start the Settings application and switch to the Bluetooth tab * Verify that Bluetooth is active and that Bluetooth devices (e.g. mice, mobile phones, headphones, etc.) can connect and operate correctly [Regression Potential] Extremely low (on groovy in particular, this has the same version of bluez as hirsute). The only significant risk is to non-Pi platforms or dongles which also use the Broadcom 43xx (or Cypress 305) chips for Bluetooth which might be inadvertently affected by these patches. [Original Description] The new Pi 400 has a slightly different Wifi/BT chip to the Pi4. Whilst wifi works happily, Bluetooth fails to operate. This doesn't appear to be an issue with either the firmware (the latest versions from upstream Raspbian have been tried), or the kernel (a known-good raspi kernel has been tested under Ubuntu), but with Bluez itself. Specifically, tracing the initialization with btmon on Raspbian and Ubuntu, the stack consistently fails when attempting to "Set Default PHY" on the latter. Curiously, under Ubuntu the adapter also appears to lack a MAC address. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1903048/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
