network interfaces: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000\ link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP mode DEFAULT group default qlen 1000\ link/ether 00:25:b5:21:a5:2c brd ff:ff:ff:ff:ff:ff 3: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP mode DEFAULT group default qlen 1000\ link/ether 00:25:b5:21:b5:2c brd ff:ff:ff:ff:ff:ff 4: enp12s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000\ link/ether 00:25:b5:00:00:00 brd ff:ff:ff:ff:ff:ff
enp6s0 and enp7s0 are iscsi interfaces -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2056187 Title: fails to configure BOOTIF when using iscsi Status in initramfs-tools package in Ubuntu: Confirmed Status in open-iscsi package in Ubuntu: Confirmed Bug description: we have a bad interaction between initramfs-tools and open-iscsi, resulting in the boot interface not being configured. when the iscsi has a static address, the script `local-top/iscsi` from open-iscsi creates a /run/net-$DEVICE.conf file for the iscsi interface. The existence of this file makes configure_networking() skip configuring the BOOTIF later due to this code in `scripts/functions`: for x in /run/net-"${DEVICE}".conf /run/net-*.conf ; do if [ -e "$x" ]; then IP=done break fi done To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2056187/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
