Triode wrote: > Yes - all reports of uac2 dacs seem to use s32_le. (The most recent one > in EOD 0.5 contains an optimisation for 32bits which I could not test, > but I am assuming that its working for other users as there are over 150 > installs of it) > > I'm interested in what the dmesg log says in this case, ssh to the dac > and type "dmesg" - are there any errors at the end of it? > > I think this is the first dac I've seen which does not have descrete > rates, but a range of sample rates - can you confirm the exact output of > /proc/asound/<card>/stream0
dmesg output: ....... oprofile: using arm/armv6 TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com> ieee80211_crypt: registered algorithm 'NULL' mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 No external RTC clock Real TIme clock Driver v1.0 mxc_rtc: probe of mxc_rtc.0 failed with error -2 Static Power Management for Freescale i.MX35 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3 MXC Backlight Device mxc_ipu_bl.0 Initialized. platform mxc_rtc.0: setting system clock to 1970-01-01 00:01:02 UTC (62) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 152K usb 1-1: new high speed USB device using fsl-ehci and address 2 usb 1-1: configuration #1 chosen from 2 choices UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 2, name "ubifs" UBIFS: file system size: 19869696 bytes (19404 KiB, 18 MiB, 154 LEBs) UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 8 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 938494 bytes (916 KiB) FAB4 IR: fw checksum ok aa33 firmware: requesting helper_sd.bin firmware: requesting sd8686.bin eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. eth0: status: link down. eth0: status: link up, 100MBit Full Duplex, auto-negotiation complete. tsl2569: set timing: (1,2): 12 Store Gain: 1 Store Factor: 40 CMD_RESP: cmd 0x801f error, result=0x1 Stream0 has a lenth of 0 byte! ------------------------------------------------------------------------ skydl's Profile: http://forums.slimdevices.com/member.php?userid=47345 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
