giantpopples wrote: > Hello ! > I have recently bought a Emotiva A-100 amp which has a very nice > function : it detects when a signal comes from the stereo RCA input to > automatically power. > Problem is, I have hooked up my squeezebox touch and it seems that there > is always current on the RCA output (like the digital one), even when > the SBT is in standby, therefore the amp is always on :-( (the fault is > on the SBT, if I remove the RCA from the SBT after a few seconds the amp > goes off) > Is that normal behavior, and is there any options/plugins/lua file I > could use to have this behavior disabled ? > > The amp also have a trigger input, but the SBT does not support this > whith the 3.5" audio out.. > > Thank you very much !
Are you talking about the single RCA digital out, or the two analog RCA outs? The noise level on the analog outs is VERY low when not playing anything, if that is triggering the amp then either its sensitivity is set wrong or you have a ground loop. If you are talking about the DIGITAL out from the Touch, then this is a known issue, the digital out is always sending out a signal, even if it is "silent". John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=97477 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
