Triode wrote: > Its not documented in any way... What you need to do is use poky to > build the normal image including the kernel. This is documented on the > wiki for building squeezeos. You need to build the latest 7.7 image. > This will cause poky to fetch and patch the logitech version of 2.6.26. > I'd verify you can do this and then load the image on the device before > going any further. > > Good luck! > > I've then selectively applied a set of patches from more recent usb > kernel changes - the diff for this from the standard build 2.6.26 is > here: > http://code.google.com/p/triodeapplets/downloads/detail?name=fulldiff.patch&can=2&q= > > Then recompile linux and rebuild the image - by just compiling linux and > the image, poky won't fetch and extract the original linux. Here's the > set of commands I used: > > Here's an extract from a history from the vm I was doing that on: > > 2016 bitbake linux-fab4 -c compile -f > 2017 bitbake squeezeos-image > 2018 cd tmp-fab4/deploy/images/kernel-image/ > 2019 cp ../fab4.bin . > 2020 unzip fab4.bin > 2023 zip kernel-test11.bin board.version upgrade.md5 zImage > > You could ignore steps 2018-2023 as they are only to extract the kernel > from the full image. 16 and 17 will build the image after up apply the > patch.
Bad new for the Schiit DACs....they do NOT support Linux. They work great in Windows but stay away if you plan to use them for the EDO and the Touch: "Sorry, as stated in the FAQ, we don't support Linux on any of our DACs. Jason Stoddard Co-Founder" http://audiokarma.org/forums/showthread.php?p=6364628 Thanks again Triode for all of your hard work! ------------------------------------------------------------------------ dustinsterk's Profile: http://forums.slimdevices.com/member.php?userid=19649 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
