blackscorpio wrote: > Has anyone used Starting point systems DAC 3 successfully with the > touch? > > I tried it keeps restarting when I select DIGITAL out in the settings. > Am I doing something wrong? > > Sent from my HD1901 using Tapatalk
I only have my own experience with my Gungnir and my Modi DACs to draw upon, but FWIW ... if you are trying to use USB, you should see your specific DAC listed as an option on the Touch screen. I.E. - digital AND analogue AND Starting Point DAC 3. If your DAC isn't listed as an option on the Touch screen, then it probably isn't going to work - at least not on USB. Even if you do see it listed, it may not play which is what I faced with my Gungnir. If you have Coax s/pdif available as DAC inputs, then the Touch EDO may work using digital out. It did with my Gungnir. As was mentioned earlier, the Touch does reboot every time you change output. One final observation based on my experience. The original Touch will play (up to) 96/24 files without EDO. It will convert it to analogue output (internal DAC), or output it digitally by way of Coax or Optical. The EDO app provides TWO enhancements to the Touch. One, it enabled digital output of up to 192/24, and Two it added USB as an additional output. LMS 8.1 > Touch+ (USB) > Schiit Gungnir multibit dac > The Truth pre-amp > Nelson Pass J2 power amp > Horned Heil speakers ------------------------------------------------------------------------ pierrepfeffer's Profile: http://forums.slimdevices.com/member.php?userid=62364 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
