Try adjusting the volume on the radio. You should be getting a green light when it's receiving.
Scott w2fcp wrote: > > > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > "w2fcp" <whit...@...> wrote: > > > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > "Keith VE7GDH" <ve7gdh@> wrote: > > > > > > W2FCP wrote... > > > > > > > I recently updated my Nuvi 350 to ver 6 of the software. Prior to > > > > updating I noticed that the Nuvi was still displaying stations that > > > > had not been active in weeks. > > > > > > It's up to you to delete old station. The T2 doesn't tell it to do so, > > > and the Nuvi doesn't have any "auto delete" function. > > > > > > > Now that I have updated it no stations are being identified on the > > > > display. It transmits my coordinates and messaging works fine, > just no > > > > display of stations. What do I need to do to fix this? > > > > > > They should still be displaying. Make sure WAYPOINTS is ON and > > > MAXRANGE isn't so short that is excluding all stations. Your receive > > > audio must be OK if you are still receiving messages. > > > > > > 73 es cul - Keith VE7GDH > > > -- > > > "I may be lost, but I know exactly where I am!" > > > > > > > Ok, just checked and Waypoints are on, I just set Maxrange to 50. I > don't live in a metropolitan but there are about 10 stations I should be > seeing with that range. I should also be seeing my mobile station name > under the vehicle icon on the nuvi right? > > > > I just realized it has not worked properly since I started using it with > my VX-170 a few days ago. I can send packets out, but am not getting > anything in. I have the jumper set to HT. Is there any other settings I > need to adjust? > >
