Scott, When looking at the board under magnifier, I notice it's LED1 that light's gren (it's marked "red", LED 2 (marked grn) does not light
Crystal is not shorted Scott (n3ujj) --- In [email protected], Scott Miller <sc...@...> wrote: > > Hmm, does the crystal on the T2-135 board look OK? Leads aren't shorted > or anything? If only one LED is stuck on, that's usually a sign of a > clock oscillator failure. > > Scott > > n3ujj wrote: > > > > > > Just got my T2-135, and I am installing into a DR-06T (6-meter rig) > > > > The DR-06T will except EJ-41U (per the manual, and options on the Alinco > > site). > > > > Talked to Scott before the purchase and he felt as long as it fit inside > > it should work... > > > > Installation could not be easier, when I enable the TNC (FUNC+SQL) only > > the green led lights up (no flashing just lights up) > > > > Otwincfg.exe will not connect, and I can't get anything via hyperterm. > > > > I did jumper 2&3 (on db9) and what I type is echoed (so I know com port > > is ok) > > > > Looking for suggestions > > > > Thanks in advance, > > > > Scott Gillis (N3UJJ) > > > > >
