If it's KC0WNY-1, the last digi path it sent was "WIDE-N". Study the link below for KPC-3+ setting recommended by Mr. APRS. http://www.aprs.org/kpc3/kpc3+WIDEn.txt
--- In [email protected], "Teddy Banks" <tbanks...@...> wrote: > > KC0WNY it did work, I think there is something wrong with my setup, I am > going to post it, but I think I should post it on the Aprs reflector, as > this doesn't have much to do with the tracker. Thanks > ----- Original Message ----- > From: "Keith VE7GDH" <ve7...@...> > To: <[email protected]> > Sent: Friday, November 20, 2009 5:08 PM > Subject: Re: [tracker2] T2 and Nuvi 350 > > > Teddy KC0WNY wrote... > > > BLT 1 EVERY 00:30:30 > > LTP 1 APN383 VIA WIDE2-2 > > That should send the contents of LT 1 every 30 mins and 30 seconds to > APN383 with a path of WIDE2-2. You should be able to adjust LT 1-4, BLT > 1-4 and LTP 1-4 so that it sends the information out every 10 minutes > with no path except once per hour with a one hop path and once per hour > with a two hop path. That gets your information out often locally, and > less often one to two hops away. > > I would suggest setting up another radio and TNC and verifying that it > is actually sending what you expect it should be sending. You should be > able to hear it direct, but it would have to make it to an IGate for me > to see it here. > > Is it KC0WNY-1 we are talking about? It hasn't got a position report to > an IGate for over 60 days now. > > http://aprs.fi/info/KC0WNY-1 > > 73 es cul - Keith VE7GDH > -- > "I may be lost, but I know exactly where I am!" > > > > ------------------------------------ > > Yahoo! Groups Links >
