The jumper is not on HT, it is on HI Are you saying to remove the jumper and leave it open? (no HI or HT)
Don VE7EDA --- In [email protected], li...@... wrote: > > Don, > > Are you jumpered in the OT2 for HT? If so, take that jumper out. It MIGHT > be feeding back through the key line. I have seen this happen with several > Icom mobiles. > > Jason KE4NYV > RPC Electronics, LLC > www.rpc-electronics.com > > --- On Tue, 12/1/09, donmor46 <donmo...@...> wrote: > > From: donmor46 <donmo...@...> > Subject: [tracker2] Tracker 2 with Motorola stays on tx > To: [email protected] > Date: Tuesday, December 1, 2009, 2:27 PM > > > > > > > > Â > > > > > > > > > > > > Anyone had any experience with the tracker 2 and a Motorola M120. > > My radio stays on transmit and goes off when turning a corner. Exact opposite > of what it should do. > > Hooked up on the bench, it is on tx and pulses to off as it samples. > > Jumper is in HI position. (All jumpers set as when purchased) > > Tried two different radio's. > > OT1 when hooked up appears to work ok with same radio, cable etc. > > > > Thanks for any help. > > > > Don > > VE7EDA >
