I am using one of your cables Jason. The cable is OK. Works fine with the OT1 etc. Problem is the MOSFET is blown in the T2.
Don VE7EDA --- In [email protected], li...@... wrote: > > Here is the M120 16 pin acc port pinout: > > http://www.batlabs.com/images/gmacc16.gif > > You should be using: > > 3: PTT > 5: Flat TX Audio > 7: Ground > 11: Flat RX Audio (discriminator) > > You can also use pin 13 to power the Tracker2. Makes for a simple, seamless > cable from radio to Tracker2. > > Jason KE4NYV > RPC Electronics, LLC > www.rpc-electronics.com > > --- On Thu, 12/3/09, Patrick <wins...@...> wrote: > > From: Patrick <wins...@...> > Subject: Re: [tracker2] Re: Tracker 2 with Motorola stays on tx > To: [email protected] > Date: Thursday, December 3, 2009, 10:48 AM > > > > > > > > Â > > > > > > > > > > how do you have your cable wired to the accessory port on the m120? > > > > p > > > > donmor46 wrote: > > > Scott > > > > > > Hooked the tracker 2 up to a Motorola M120 and it transmits except when I > > turn a corner, then it quits transmitting just for a second. > > > Also run an OT1 with an Icom HT and swapped out the OT1 for the tracker 2, > > changed the jumper from HI to HT and it does the same thing. Seems to > > transmit all the time except when it samples, then it seems to pulse off > > just for a second. > > > Seems that no matter what radio etc, it just transmits whenever it's hooked > > up and powered up. > > > > > > Don > > > VE7EDA > > > > > > > > > > > > --- In track...@yahoogroup s.com, Scott Miller <scott@> wrote: > > > > > >> I missed the start of this. Is it a handheld or a mobile? For a > > >> mobile, I'd start by disconnecting pin 3 (PTT) and testing that it works > > >> when you trigger it manually. > > >> > > >> Scott > > >> > > >> > > > > > > > > > > > > > > > ------------ --------- --------- ------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > >
