Both of those should be red while transmitting. Have you tried using the diagnostics screen to key PTT manually?
Scott [email protected] wrote: > I set it lower and took out the HI jumper. using a FT-2700RH 25w. this radio > works good with a opentracker. I'm also using a garmin 350. its still > bringing both the ACT/TX solid red when it trys to transmit. > -------------------------------------------------- > From: "Scott Miller" <[email protected]> > Sent: Wednesday, December 30, 2009 1:31 PM > To: <[email protected]> > Subject: Re: [tracker2] what am i doing wroung on setting up? > >> What mobile rig are you using? Try setting the audio level lower - some >> rigs won't transmit if the audio level is too high, and setting the HT >> jumper lowers the audio level. Pull the HI jumper (if set) and set the >> audio slider to maybe 1/4 and see what happens. >> >> Scott >> >> Ron K7CDL wrote: >>> >>> >>> i just got my tracker2 OT2m in. when it trys to send i have the RX light >>> go off and the ACT/TX lights turn soild red for a few secs. i'm using a >>> mobile rig. if i move the jumper to HT then it turns on my mobile so i >>> know my mobile cables are right. please help. thanks >>> K7CDL >>> Ron >>> >>> >> >> >> >> ------------------------------------ >> >> Yahoo! Groups Links >> >> >> >> > > > ------------------------------------ > > Yahoo! Groups Links > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
