Ok Alan, I downloaded it from your link and reloaded my tracker. Also saved it. Thanks. I took the low voltage out of my program. I am going to stop tomorrow and get some 12 gauge wire to run to the radio and put it on a seperate line directly from my house batteries. That should take care of any low voltage that might be causeing me trouble. I have 8 gauge wire up to within 2 feet of it now so will be easy fix. I appreciate everyone's help. Dan
--- In [email protected], "Alan" <a...@...> wrote: > > Dan you should download the latest OTWinconfig program. It changes when new > features come out, unfortunately there is no easy way to tell the otconfig > build. So delete your current one and download. Update your firmware using > the web update tab in the otWinconfig program. > > I don't see any thing obvious, but the no tx on low Voltage could be > bouncing. Try the config file I uploaded, after downloading the otconfig, and > updating firmware. Can you check voltage when it transmits? It could be > resetting from voltage drop, or RF. LEDs flash like restart. > Your GPS is solid, so it's not falsing from weak signals. > > Latest OTwinconfig > https://www.argentdata.com/support/firmware/otwincfg.exe > > Hope this helps, > Alan > > > --- In [email protected], "dan" <wd0afq@> wrote: > > > > I guess I should have left it alone. I reset everything and it went back to > > beaconing every minute. Will yall look at my most recent settings and see > > if you can see a mistake I have made? I just uploaded my new settings. > > Thanks, > > Dan > > >
