If you don't see a key for it, it's probably not there. You can do it
with scripting macros:
Macro CAR
Exec "symbol />"
End Block
Macro BOAT
Exec "sym /b"
End Block
I don't remember the symbol for boat, so I'm just guessing at /b. With
this set up and scripting running, you should be able to switch using
the commands --CAR and --BOAT from the nuvi message screen.
Scott
Pete Lilja wrote:
>
>
> Now that I've successfully reloaded the firmware to my T2-135 and can
> beacon my position at will I also started to use the messaging more to
> communicate with the T2 using the Nuvi 350.
>
> Since I plan to also use the 350 / Alinco / T2-135 in my boat I was
> switching the 'symbols' that show up on the mapping software from _car_
> to _boat._ That works just fine. However, when trying to switch back
> to the car symbol I realized I was unable to find the ">" symbol within
> the Nuvi's messaging letters / symbols / numbers screens! Are these
> symbols simply not supported by the Nuvi or am I not seeing how to
> access them? While looking I also noticed there is no "\" but there is
> a" /". This limits somewhat what can be programmed to the T2 through
> the Nuvi...but, what'd'ya do about it?
>
> Thanks for any insight,
>
> Pete
> KC0GPB
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
