Use the 'web' button in the config program and grab the latest one. 
It's 55-something.

Scott

Al Waschka wrote:
>  
> 
> I  have the latest Nuvi FW.  I can't relate the information on the 
> firmware history (just release dates) to the response I get to VER, but 
> my unit is Build 54746.
>  
> Al
> 
> 
> --- On *Tue, 2/23/10, Scott Miller /<[email protected]>/* wrote:
> 
> 
>     From: Scott Miller <[email protected]>
>     Subject: Re: [tracker2] Re: Messaging anomalies - Nope, still
>     sending forever......
>     To: [email protected]
>     Date: Tuesday, February 23, 2010, 12:57 AM
> 
>     Hmm.  And you're using the latest T2 firmware?  What is RETRIES set to?
> 
>     Scott
> 
>     [email protected]
>     <http://us.mc1806.mail.yahoo.com/mc/[email protected]>
>     wrote:
>      > 
>      >
>      > Sorry, my mistake. Go to findu and look at my messages (K5TAN-9).
>      > Message was retransmitted roughly every two minutes for 1.5
>     hours. It
>      > only stopped because I powered the system down to re-run the
>     power and
>      > data cables to the Nuvi. Later tonight after finishing the
>     rewiring I
>      > tried to get a VERSION report out of the system, but I had to
>     delete the
>      > old message out of the outbox. Either RETRIES isn't working on
>     messages
>      > or the Nuvi is re-sending the message to the OT2. I still think
>     the Nuvi
>      > needs to handle a message retrying out as if it was acked by the
>      > receiving station to clear out the OUTBOX.
>      >
>      > Al
>      >
>      > --- In [email protected]
>     <http://us.mc1806.mail.yahoo.com/mc/[email protected]>
>     <mailto:tracker2%40yahoogroups.com>,
>      > "awasc...@..." <awasc...@...> wrote:
>      >  >
>      >  > Scott,
>      >  >
>      >  > With the new Nuvi firmware, RETRIES appears to limit the
>      > transmissions where it wasn't with the old firmware. However, when a
>      > message is never acked and retries out, it stays in the Nuvi
>     outbox and
>      > subsequent messages are not transmitted to the OT2. I think OT2
>     is not,
>      > but needs to, send something to the Nuvi when a message retries
>     out. I
>      > verified this by sending a message to a station that was not on
>     the air.
>      > It retried out. I then tried a VER command and got no response
>     until I
>      > went in and manually deleted the previous message from the outbox.
>      >  >
>      >  > Al
>      >  >
>      >  >
>      >  > --- In [email protected]
>     <http://us.mc1806.mail.yahoo.com/mc/[email protected]>
>     <mailto:tracker2%40yahoogroups.com>,
>      > Al Waschka <awaschka@> wrote:
>      >  > >
>      >  > > I did not have the latest FW.  I have now upgraded and will
>     see how
>      > that works.
>      >  > >
>      >  > > --- On Thu, 2/18/10, Scott Miller <scott@> wrote:
>      >  > >
>      >  > >
>      >  > > From: Scott Miller <scott@>
>      >  > > Subject: Re: [tracker2] Messaging anomalies
>      >  > > To: [email protected]
>     <http://us.mc1806.mail.yahoo.com/mc/[email protected]>
>     <mailto:tracker2%40yahoogroups.com>
>      >  > > Date: Thursday, February 18, 2010, 11:44 AM
>      >  > >
>      >  > >
>      >  > > Have you checked to make sure you're running the latest nuvi
>     firmware?
>      >  > > They fixed a bug at some point that caused problems with
>     message ACKs.
>      >  > >
>      >  > > Scott
>      >  > >
>      >  > > awaschka@ wrote:
>      >  > > >
>      >  > > >
>      >  > > > Hi -
>      >  > > >
>      >  > > > I purchased an OT2m in October and have it hooked up with
>     a Nuvi
>      > 350 via
>      >  > > > the FMI cable purchased at the same time. I'm seeing some
>      > anomalies in
>      >  > > > the messaging as follows:
>      >  > > >
>      >  > > > 1. On first few tries, I got back an indication that a sent
>      > message was
>      >  > > > acknowledged. Haven't seen that lately.
>      >  > > >
>      >  > > > 2. A single receive message will come in and be displayed
>     on the
>      > Nuvi
>      >  > > > multiple times.
>      >  > > >
>      >  > > > 3. I sent a message yesterday afternoon and today, after
>     over 50
>      >  > > > retries, the message is still being sent out. Retries is
>     set to 6.
>      >  > > >
>      >  > > > 4. When I tried to queue the retries query, it wouldn't go
>     out
>      > until I
>      >  > > > cleared the old messag in the outbox. It looks like the
>     OT2 is not
>      >  > > > acking the message to the Nuvi so the Nuvi keeps sending it.
>      >  > > >
>      >  > > > Any ideas?
>      >  > > >
>      >  > > > Thanks,
>      >  > > >
>      >  > > > Al K5TAN
>      >  > > >
>      >  > > >
>      >  > >
>      >  > >
>      >  > >
>      >  > > ------------------------------------
>      >  > >
>      >  > > Yahoo! Groups Links
>      >  > >
>      >  >
>      >
>      >
> 
> 
> 
>     ------------------------------------
> 
>     Yahoo! Groups Links
> 
> 
>         (Yahoo! ID required)
> 
> 
>         [email protected]
>     
> <http://us.mc1806.mail.yahoo.com/mc/[email protected]>
> 
> 
> 
> 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/tracker2/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/tracker2/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to