You just need the cable, the jumper inside the tracker takes care of the PTT components. Its totally painless. Its in the manual.
You can buy a ready made cable from Byonics or from RPC Electronics http://www.rpc-electronics.com/ ... if your eyes are like mine, you will opt for the ready made cable. de Rudy VE3BDR - freshly retired, time to play. ----- Original Message ----- From: DennisB To: [email protected] Sent: Monday, March 08, 2010 12:28 AM Subject: [tracker2] Connect an Icom IC-02A to Tracker 2 Howdy, I'm about ready to buy some 2.5mm and 3.5mm cables to connect an Icom-02A HT to a Tracker2. Has anybody got this combination to work? The pinouts I've found show, a .22uf cap going to the mike audio and a 3.3K resistor going to the PPT. Are these necessary ?? Thanks for any help !!!! DennisB W7IME ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.435 / Virus Database: 271.1.1/2729 - Release Date: 03/07/10 19:34:00
