I was trying to send to another station I had setup for testing in the same room. The Tracker2 is is set for KI6WLP-2 and I was trying to send to a test stations�KI6WLP-1 and KI6WLP-3
The second test staion is a Yaesu VX-8R hooked to a another brand Tracker. I know the�second Tracker works because it shows�up on aprs.fi KI6WLP-1 is the ID assigned to another brand of tracker�which is hooked to a�laptop running APRSIS32,�I also had the APRSIS32 software set for KI6WLP-3. I do see other stations showing up on the Nuvi 350 and they're in the "Favorites" list.� I tried send using the following: -KI6WLP-1 TEST and also -KI6WLP-3 TEST Also when the APRSIS32 software on the laptop�is in the RF�mode is can see other APRS station�through the VX-8R, Tracker, and to the laptop. I think maybe once I was able to send from the laptop using RF mode to the Tracker2 and Nuvi 350. I thought I can send directly to another APRS station without going through a digipeater, am I mistaken? If they're in the same room for testing, could that be causing a problem? Craig - KI6WLP
