Only going red on TX is just fine. You want to see a green blink when it's getting a GPS fix.
Scott [email protected] wrote: > > > Thanks Scott: > > I suspect that it is in there but several scans thru, I didn't see it. > > The only time I see it go red is when the unit transmits. Is this normal > or could I be getting RF into the unit? > > I was using a mag mount antenna and the only real vehicle ground is via > the power input. I might try a choke on the two serial ports and during > the summer, will attach a body ground at the antenna mount. > > Thanks again, > > Curt > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > Scott Miller <sc...@...> wrote: > > > > It should be in there somewhere... it'll blink red when it gets an > > invalid fix from the GPS and yellow when it outputs a waypoint. > > > > Scott > > > > captc...@... wrote: > > > > > > > > > What is the significance of the red color of the ACT LED on the OT2? > > > > > > I see it blinking with data comm from the Nuvi 350 and it goes to red > > > when the system is keyed and the TX LED comes on. > > > > > > Can't find any reference to what this means in the manual. > > > > > > Thanks > > > > > > Curt > > > > > > > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
