I have a similar problem with output from Kaffeine: originally I used
DVB CUT to edit out ads and output it into a format that transcode
liked, then that seemed to go wrong, so I posted to transcode group
and got back advice to try ProjectX, which I did. DVBCUT could edit
frame by frame, ProjectX goes to marker frames.
My DVBCUT started behaving strangely lately, Project X works pretty
good - check out the previous discussions by searching ProjectX and
sort by date...
On 3 May 2007, at 14:23, Francesco Romani wrote:
On 5/3/07, Richard (MQ) <[EMAIL PROTECTED]> wrote:
Hi List,
Hi,
Files extracted from the HD using Humax's own (MS Windows only)
utility
(via the USB port) are given the extension '.ts' (for transport
stream?)
Yes, they look like transport stream, and tcprobe's output confirm so.
> [EMAIL PROTECTED]:/srv/Video> tcprobe -d 2 -i GreenWing.ts
> [tcprobe] MPEG transport stream (TS)
> (ts_reader.c) Pids: 0x230 0x903 0x12c 0x0 0x232 0x231
> [tcprobe] summary for GreenWing.ts, (*) = not default, 0 = not
detected
> no audio track: use "null" import module for audio
The problem here is that transcode doesn't support mpeg ts streams (I
mean: except from very-basic-almost-nothing stuff like above).
Unfortunately, at given development rate, this will not be fixed
before 1.2.0/1.3.0.
Of course patches and contributions are always welcome and they are
strongly encouraged.
:)
Bests,
--
Francesco Romani
