Does your equipment plug into a primary (AC) circuit? Any TNV circuit is considered a secondary circuit and if any and all power is derived from the TNV network, the notes you referenced would not apply as a primary circuit is not present.
Best Regards, Dave Heald Ed Eszlari wrote: > > All, > > I have a DC to DC "filter" which is rated 32 - 72 VDC input and output > which I am considering to be TNV-2 according to EN60950/IEC60950 2nd > edition. > > This filter has a metal chassis which is earthed, and it will be > installed in a service access area only by qualified service > personnel. It is not permanently connected or pluggable type B, and > does not have a provision for a permanently connected earthing > conductor. With all this considered, it seems that Norway and Sweden > are the only Countries that require Supplemental insulation for a > primary circuit between this TNV-2 circuit and earth. > Is there any way around this requirement due to this filter operating > at 72VDC and not being directly connected to mains? > > Any help would be appreciated. > > Ed > > ---------------------------------------------------------------------- > MSN Photos is the easiest way to share and print your photos: Click > Here > ------------------------------------------- This message is from the > IEEE EMC Society Product Safety Technical Committee emc-pstc > discussion list. Visit our web site at: > http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, > send mail to: majord...@ieee.org with the single line: unsubscribe > emc-pstc For help, send mail to the list administrators: Michael > Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net > For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim > Bacher: j.bac...@ieee.org All emc-pstc postings are archived and > searchable on the web at: No longer online until our new server is > brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.