I had that problem once with Mandrake 10.2. Try booting the computer in interactive mode. It will prompt you for each service. You should be able to figure out which service is hanging on boot. This should give you more things to google on for finding a resolution. I was able to get by the hanging service by saying no when prompted to start it. It's a pain long term but short term it will get you past the problem.
On 8/1/05, Walt Novinger <[EMAIL PROTECTED]> wrote: > > I just installed a copy of Mandrake 2005 LE on one of my machines and all > went > well (seemingly). Unfortunately, when I told the system to reboot and > bring > up the new installation, the system hangs. The last couple of things I see > are: > > Simple Boot Flag at 0x3b set to 0x1 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > > The machine is an eMachines with a 1.8GHz Celeron processor and 512MB RAM. > It > was running Suse 9.0 perfectly until about 30 minutes ago. :( > > Any suggestions from the group would be most appreciated! > > Thanks, > Walt Novinger > -- > TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug > TriLUG Organizational FAQ : http://trilug.org/faq/ > TriLUG Member Services FAQ : http://members.trilug.org/services_faq/ > TriLUG PGP Keyring : http://trilug.org/~chrish/trilug.asc > -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/ TriLUG PGP Keyring : http://trilug.org/~chrish/trilug.asc
