I have set up two bind servers (one with master zones and the other with slave zones). After much research and work I have all of my domains set up and have verified that transfers are working properly. Now is the time for the servers to go live. I have pointed two test domains to these name servers before moving anything in full production. Requests aren't making it through. I think I have missed a step. Here is what I have done so far:
1) Set up servers 2) Verified that transfers are working properly from master to slave 3) Entered all of my zones, a records, ns records, mx records etc... 4) Opened port 53 on the firewall for both servers (ns1.nccumc.org<http://ns1.nccumc.org>and ns2.nccumc.org <http://ns2.nccumc.org>) 5) Registered both name servers as public servers through my domain registrar 6) Pointed two domains (nccumc.com <http://nccumc.com> and nccumc.net<http://nccumc.net>) to the name servers I can't get through to them (name servers). While reading the O'Reilly book on Bind it was suggested to use the following line in named.conf to restrict all activity to port 53: query-source address * port 53; Have I missed a port (or range of ports) that should be opened? Maybe a configuration step? Any suggestions would be most helpful. Thanks! -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
