List, I would like to boot a knoppix cd image or other minimal linux via my PXE server which utilizes PXELinux. While there are a number of faqs, wikis, etc. out there on doing this with Knoppix, most of them are describing how to start a pxe server from Knoppix, then starting a terminal server. I want to boot knoppix via my pxe server (rhel4u4 box).
That said, I know it is not feasible to somehow load the entire disk image via PXE. Is there a way to load the Knoppix initrd/kernel via PXE, and send boot parameters to set an IP and mount an NFS share? I saw this on http://dev.brantleyonline.com/wiki/index.php/PXE_Booting_-_Knoppix but have experienced some problems. I used the "knoppix nfsdir=10.0.0.101:/path" parameter but it's not working. The network interfaces aren't even being configured, so how is it supposed to work? After the client boots the image I have stored on my PXE server, it cannot mount the NFS share (thus the knoppix fs isn't available) and exits to a minimal shell. To compound this, my keyboard isn't working in this minimal shell even after trying a number of boot parameters. I'll probably get this worked out. I've considered booting to PXEGrub and working from there, but this seems like an unnecessary intermediate step. Any ideas? Thanks Shawn -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
