Owen - some comments: 1) Using the CMOS "jumper" for most BIOS'es is the equivalent of removing. Just make sure the power cord is removed from the power supply or the switch on the power supply is powered off. Give the PC a moment after pulling power so the power supply filter capacitors will discharge. THEN: once the PC is definitely off, move the CMOS jumper over, count to 3, and move it back. Then power back up and try to get into the BIOS. Also: verify the correct position of the CMOS jumper - it could be in the reset position anyway.
2) are you using a USB keyboard/mouse, or USB devices through a PS/2-to- USB adapter? If so, try switching to a PS/2 keyboard/mouse to get into the BIOS. 3) IF the PC has a socketed BIOS chip (you'd have to know where to look and what it looks like), I'd completely power off the pc (pulling the plug from the back) and press gently on the BIOS chip with your thumb. If the chip has "walked" out of it's socket, you'll here a quiet little "crak" as the chip re-seats in it's socket. Gud Luk; JKB -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
