Ok, so it turns out I had noob'd it up and just had to install the
linux-headers-generic to be able to build the module. I got that set up, then
I did 'sudo insmod acpi_call.ko'. After that, I did "echo "\OSGS 0x01" >
/proc/acpi/call" to activate the Intel graphics. I then edited the xorg.conf
to read:
Section "Device"
Identifier "Device0"
Driver "intel"
VendorName "Intel GMA 3150"
BusID "PCI:0:2:0"
EndSection
finally, I did this as per a tutorial :
cp /usr/lib/xorg/modules/extensions/libglx.so
/usr/lib/xorg/modules/extensions/libglx.so.intel
ln -s -f /usr/lib/xorg/modules/extensions/libglx.so.intel
/usr/lib/xorg/modules/extensions/libglx.so
update-alternatives --set i386-linux-gnu_gl_conf
/usr/lib/i386-linux-gnu/mesa/ld.so.conf
ldconfig
Note: I changed the i386 to x86_64 on my system.
finally, I rebooted and now when I do 'lspci -nn':
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express
Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express
Port 2 [8086:27d2] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express
Port 4 [8086:27d6] (rev 02)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA
Controller [AHCI mode] [8086:27c1] (rev 02)
01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet
[1969:1062] (rev c0)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
NVIDIA is not in the list anymore, BUT my system settings still say I am on
the fallback driver. My LCD also seems less bright.
