Hi,
I have had this problem before. There seems to be a problem in
having schedules defined for hour 23 to 24 and running the simulation with
less than 1 hour time step. Check to see if you have any schedules from 23
to 24 and change it to maybe 22 to 24.
This may be your problem but I am not sure.All the best.
Krishna
----- Original Message -----
From: "William D. Rittelmann" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, November 17, 2005 5:49 PM
Subject: [TRNSYS-users] Range Check Error
Has anyone had any success using Type 56 in TRNSYS 16 with sub-hourly
timesteps? The model runs OK at a 1-hour timestep, but anything less than
an hour and the program aborts 23 hours into the simulation. I have tried
increasing and decreasing the time base of the walls, keeping in mind that
it needs to be an integer multiple of the timestep, but this hasn't
helped.
Thanks,
Bill Rittelmann
IBACOS, Inc.
***E-mail Confidentiality Notice***
The information contained in this e-mail message and any attachments may
constitute confidential information. The information is intended only for
the use of the intended recipient. You are hereby notified that any
dissemination, distribution or copying of this communication by anyone
other than the intended recipient is strictly prohibited. If you have
received this communication in error, please notify the sender by reply
e-mail and delete this message and any attachments thereto. Thank you.
_______________________________________________
TRNSYS-users mailing list
[email protected]
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
_______________________________________________
TRNSYS-users mailing list
[email protected]
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
