Hello,
Did anyone experienced the problem reding the Contam 2.4b generated .air file.
I am using TRNsys 16.01.0003 and after linking everything and launching the
simulation give me an error right away. In the result file the error message is
:
"the multizone airflow model was unable to resolve the list of IMPUTS. There
should either be (4+nZones) inputs or there should be (4+nZones+
nPaths)inputs."
THe problem seems to stems from the use of simple AHS (Air Handling Systems) in
Contam. (The same model with no AHS and just other type of paths works fine.
Any ideas how to fix this? Could it be a bug that the format of the contam file
does not correspond to the format expected by type 97?
below is the input section of the .air file
Thanks
Best regards
PAtrick Charles
Roger Williams UNiversity
Bristol, Rhode Island
********** REQUIRED INPUTS **********
1 Temperature of zone Seniors3/<3>
2 Temperature of zone AHS_LOFT(Rec)/<3>
3 Temperature of zone AHS_LOFT(Sup)/<3>
4 Temperature of zone Stairs2/<2>
5 Temperature of zone Printing2/<2>
6 Temperature of zone BR21/<2>
7 Temperature of zone BR22/<2>
8 Temperature of zone Painting21/<2>
9 Temperature of zone Painting22/<2>
10 Temperature of zone Exhaust_Fan(Rec)/<2>
11 Temperature of zone Exhaust_Fan(Sup)/<2>
12 Temperature of zone Stairs1/<1>
13 Temperature of zone StorMech1/<1>
14 Temperature of zone Office1/<1>
15 Temperature of zone BR1/<1>
16 Temperature of zone Shop1/<1>
17 Temperature of zone Sculpture1/<1>
18 Temperature of zone AHU_Mech0(Rec)/<1>
19 Temperature of zone AHU_Mech0(Sup)/<1>
20 Ambient Temperature
21 Barometric Pressure
22 Wind Speed
23 Wind Direction
24 System flow from zone Seniors3/<3> to zone AHS_LOFT(Rec)/<3>
25 System flow from zone AHU_Mech0(Sup)/<1> to zone Printing2/<2>
26 System flow from zone Printing2/<2> to zone AHU_Mech0(Rec)/<1>
27 System flow from zone Printing2/<2> to zone Exhaust_Fan(Rec)/<2>
28 System flow from zone BR21/<2> to zone AHS_LOFT(Rec)/<3>
29 System flow from zone BR22/<2> to zone AHS_LOFT(Rec)/<3>
30 System flow from zone AHS_LOFT(Sup)/<3> to zone Painting22/<2>
31 System flow from zone Painting22/<2> to zone AHS_LOFT(Rec)/<3>
32 System flow from zone AHS_LOFT(Sup)/<3> to zone Painting21/<2>
33 System flow from zone Painting21/<2> to zone AHS_LOFT(Rec)/<3>
34 System flow from zone StorMech1/<1> to zone Exhaust_Fan(Rec)/<2>
35 System flow from zone AHS_LOFT(Sup)/<3> to zone Office1/<1>
36 System flow from zone Office1/<1> to zone AHS_LOFT(Rec)/<3>
37 System flow from zone BR1/<1> to zone AHS_LOFT(Rec)/<3>
38 System flow from zone Shop1/<1> to zone Exhaust_Fan(Rec)/<2>
39 System flow from zone AHU_Mech0(Sup)/<1> to zone Sculpture1/<1>
40 System flow from zone Sculpture1/<1> to zone AHU_Mech0(Rec)/<1>
41 System flow from zone AHU_Mech0(Sup)/<1> to zone Shop1/<1>
42 System flow from zone Shop1/<1> to zone AHU_Mech0(Rec)/<1>
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
