In Studio (the visual interface) pick a printer under the subset "output", for example one with no units, in the parameter screen of that printer you find "delimiters" Chose 0 for tabs, 1 for spaces and 2 for comma`s...the last tab-screen of the printer allows you to select a place and name for the results file. If you just select a name, it will be placed in the folder of the file you are simulating...
Then to see the results after the simulation...go to excell and do an "import external data" which will probably be under the topic "data" in the menu . There you select the appropriate delimitter Quoting [EMAIL PROTECTED]: > Yes. I want to output data to file. > > Best Regards > LEE, Chun Kwong > PhD student > Department of Mechanical Engineering > University of Hong Kong > > > ----- Message from [EMAIL PROTECTED] --------- > Date: Mon, 28 Jan 2008 14:21:38 +0100 > From: Leen Peeters <[EMAIL PROTECTED]> > Reply-To: Leen Peeters <[EMAIL PROTECTED]> > Subject: Re: [TRNSYS-users] Formatted output to file > To: [EMAIL PROTECTED] > > > > can you be a bit more specific. Do you mean output data? > > > > Quoting [EMAIL PROTECTED]: > > > >> Hello, Trnsys users. > >> > >> Please advise how I can write formatted data to file. Thank you! > >> > >> Best Regards > >> LEE, Chun Kwong > >> PhD student > >> Department of Mechanical Engineering > >> University of Hong Kong > >> > >> > >> > > > > > > > > > > Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm > > > > > ----- End message from [EMAIL PROTECTED] ----- > > > > Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm _______________________________________________ TRNSYS-users mailing list TRNSYS-users@engr.wisc.edu https://www.cae.wisc.edu/mailman/listinfo/trnsys-users