<For example, I’ve made a deck with one equation and ten variables : Error=abs(a)+abs(b)+abs(c)+abs(d)+abs(e)+abs(f)+abs(g)+abs(h)+abs(i)+abs(j) Where a, b, c, d, e, f, g, h, i, j are variables (initial value =1, min value=0, maxvalue=10, step=0.5)>
From the output listing, it looks like GenOpt is getting a result back from TRNSYS that isn't right. Your first iteration in GenOpt (where all 10 variables are set to 1.0) should return a value of 10 and instead returns a value of 1. Please check your equation carefully in TRNSYS and make sure its giving you the correct result before running GenOpt. It may be that the line is too long or something else that is causing the TRNSYS problem. Please let us know what you find. Jeff Jeff Thornton President - TESS, LLC 2916 Marketplace Drive - Suite 104 Madison WI 53719 USA Phone: 608-274-2577 Fax: 608-278-1475 E-mail: [EMAIL PROTECTED] Web: www.tess-inc.com _______________________________________________ TRNSYS-users mailing list TRNSYS-users@engr.wisc.edu https://www.cae.wisc.edu/mailman/listinfo/trnsys-users