Hi,
In my main() method, I instantiate TurbineConfig like this:
new TurbineConfig("WEB-INF/conf", "TurbineResources.properties")
while running the app from the top of my application root directory (ie. under
~/tdk/webapps/<myapp>). This is the same properties file used to successfully run
the Turbine servlet.
(Also, I don't know if this is related to my problem but I found that it was
ackward to build the CLASSPATH in order to get Turbine to run from the command
line -- every single JAR that is used in 'lib' needs to be visible, so I unjarred
velocity.jar, turbine.jar, xmlrpc.jar, log4j.jar, etc, into my classes
subdirectory and used java -cp WEB-INF/classes <program-name>)
The properties file is successfully read but I get the following output. Attached
is the TurbineResources.properties file. Do I need to change the paths referenced
in the properties file? Also, is there a way to "turn off" services I don't need
so that those services (Velocity, Template, etc.) are not initialized?
------
Entered main...
Turbine: init
Exception in thread "main" java.lang.Error: VelocityService runtime log
file is misconfigured: 'null' is not a valid log file: TurbineConfig
users must use a path relative to web application root
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Error.<init>(Compiled Code)
at
org.apache.turbine.services.velocity.TurbineVelocityService.initVelocity(Compiled
Code)
at
org.apache.turbine.services.velocity.TurbineVelocityService.init(TurbineVelocityService.java:138)
at org.apache.turbine.services.TurbineBaseService.init(Compiled
Code)
at
org.apache.turbine.services.BaseInitableBroker.initClass(Compiled Code)
at
org.apache.turbine.services.BaseServiceBroker.doInitService(Compiled
Code)
at
org.apache.turbine.services.BaseServiceBroker.initServices(Compiled
Code)
at org.apache.turbine.Turbine.init(Turbine.java:185)
at
org.apache.turbine.util.TurbineConfig.init(TurbineConfig.java:163)
at jcahoots.tests.PopulateFolders.main(PopulateFolders.java:11)
Dave Hollar wrote:
> What is the error message that you're getting?
>
> ----- Original Message -----
> From: "Nathaniel Reed" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, November 20, 2001 1:01 PM
> Subject: running Turbine code as a standalone app
>
> > Hi,
> >
> > I need to use my Torque-generated code (OM, Peer) to populate the
> > database.
> >
> > Can someone advise me on how to do this?
> >
> > I tried instantiating TurbineConfig as suggested in the documentation
> > but get an error message.
> >
> > Thanks
> >
> > --
> > Nate Reed
> > Physical Oceanography Distributed Active Archive Center
> > Jet Propulsion Laboratory (Raytheon)
> > [EMAIL PROTECTED]
> > (626) 744-5528
> > (626) 744-5506
> >
> >
> >
> > --
> > To unsubscribe, e-mail:
> <mailto:[EMAIL PROTECTED]>
> > For additional commands, e-mail:
> <mailto:[EMAIL PROTECTED]>
> >
>
> --
> To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]>
> For additional commands, e-mail: <mailto:[EMAIL PROTECTED]>
--
Nate Reed
Physical Oceanography Distributed Active Archive Center
Jet Propulsion Laboratory (Raytheon)
[EMAIL PROTECTED]
(626) 744-5528
(626) 744-5506
# -------------------------------------------------------------------
# $Id$
#
# This is the configuration file for Turbine.
#
# Note that strings containing "," (comma) characters must backslash
# escape the comma (i.e. '\,')
#
# -------------------------------------------------------------------
# -------------------------------------------------------------------
#
# L O G S
#
# -------------------------------------------------------------------
# This is the configuration for the logging system. In most cases
# you don't need to modify anything. However, if you wish to add more
# facilities or modify the existing settings, then you can do so.
#
# destination.file: A path relative to the web app root
# -------------------------------------------------------------------
services.LoggingService.facilities=system,debug,security
services.LoggingService.default=system
services.LoggingService.loggingConfig=org.apache.turbine.services.logging.PropertiesLoggingConfig
# A facility for system logging.
services.LoggingService.system.destination.file=/logs/turbine.log
services.LoggingService.system.className=org.apache.turbine.services.logging.FileLogger
services.LoggingService.system.level=INFO
# A facility for the scheduler service
# To disable started/stopped messages set the level to ERROR
services.LoggingService.scheduler.destination.file=/logs/turbine.log
services.LoggingService.scheduler.className=org.apache.turbine.services.logging.FileLogger
services.LoggingService.scheduler.level=INFO
# A facility for debugging applications. Messages will go both
# to the log file and the server console.
services.LoggingService.debug.destination.file=/logs/turbine.log
services.LoggingService.debug.destination.console=true
services.LoggingService.debug.className=org.apache.turbine.services.logging.FileLogger
services.LoggingService.debug.level=INFO
# A facility for SQL query logging
# To enable SQL query logging, set the system and sql log level to DEBUG
services.LoggingService.sql.destination.file=/logs/turbine.log
services.LoggingService.sql.className=org.apache.turbine.services.logging.FileLogger
services.LoggingService.sql.level=ERROR
# A facility for security audit. NOTE! As of 23 Jan 2001
# Turbine does not have any standard security auditing
# functionality. It's up to your application.
services.LoggingService.security.destination.file=/logs/turbine.log
services.LoggingService.security.className=org.apache.turbine.services.logging.FileLogger
services.LoggingService.security.level=INFO
# An example configuration for automatic log rotation using Log4Java
# This will keep the log file size under 1MB and save up to 5 backup copies
services.LoggingService.rotation.destination.file=/logs/turbine.log
services.LoggingService.rotation.file.size=1048576
services.LoggingService.rotation.file.backups=5
services.LoggingService.rotation.className=org.apache.turbine.services.logging.Log4JavaLogger
services.LoggingService.rotation.level=INFO
# An example configuration for using *NIX syslogd with Log4Java
services.LoggingService.syslog.destination.syslogd.host=my.syslog.server.com
services.LoggingService.syslog.destination.syslogd.facility=LOG_DAEMON
services.LoggingService.syslog.className=org.apache.turbine.services.logging.Log4JavaLogger
services.LoggingService.syslog.level=INFO
# An example configuration for using remote Log4Java server
services.LoggingService.remote.destination.remote.host=my.remote.server.com
services.LoggingService.remote.destination.remote.port=1099
services.LoggingService.remote.className=org.apache.turbine.services.logging.Log4JavaLogger
services.LoggingService.remote.level=INFO
# An example configuration for sending error reports as email with Log4Java
# notes:
# * uses 'mail.server' as SMTP server to send mail through
# * log4j will send the email when an ERROR is logged, with
# 'buffer.size' previous (non-ERROR) logs included in the email
# * configured to log to a file as well otherwise stacktraces are lost
services.LoggingService.email.destination.file=/logs/turbine.log
services.LoggingService.email.destination.email.from=root@localhost
services.LoggingService.email.destination.email.to=root@localhost
services.LoggingService.email.destination.email.subject=Turbine Error Report
services.LoggingService.email.destination.email.buffer.size=512
services.LoggingService.email.className=org.apache.turbine.services.logging.Log4JavaLogger
services.LoggingService.email.level=INFO
# -------------------------------------------------------------------
#
# M A I L S E R V E R
#
# -------------------------------------------------------------------
# Your mail server for outgoing email.
#
# Default: null
# -------------------------------------------------------------------
mail.server=
# -------------------------------------------------------------------
# SMTP-From header for your outgoing messages
#
# All failed delivery messages will be returned to this address.
# If unset, these messages will be sent to the address in the
# From header (standard behaviour)
#
# Default: null
# -------------------------------------------------------------------
mail.smtp.from=
# -------------------------------------------------------------------
#
# M O D U L E C A C H I N G
#
# -------------------------------------------------------------------
# This determines whether or not to cache the modules in memory. For
# development, turn this off. For production, turn this on.
#
# Default: false
# -------------------------------------------------------------------
module.cache=false
# If module.cache=true, then how large should we make the hashtables
# by default.
action.cache.size=20
layout.cache.size=10
navigation.cache.size=10
page.cache.size=5
screen.cache.size=50
scheduledjob.cache.size=10
# -------------------------------------------------------------------
#
# M O D U L E P A C K A G E S
#
# -------------------------------------------------------------------
# This is the "classpath" for Turbine. In order to locate your own
# modules, you should add them to this path. For example, if you have
# com.company.actions, com.company.screens, com.company.navigations,
# then this setting would be "com.company,org.apache.turbine.modules".
# This path is searched in order. For example, Turbine comes with a
# screen module named "Login". If you wanted to have your own screen
# module named "Login", then you would specify the path to your
# modules before the others.
#
# Default: org.apache.turbine.modules
# -------------------------------------------------------------------
module.packages=jcahoots.modules,org.apache.turbine.flux.modules
# -------------------------------------------------------------------
#
# D A T A B A S E S E T T I N G S
#
# -------------------------------------------------------------------
# These are your database settings. Look in the
# org.apache.turbine.util.db.pool.* packages for more information.
# The default driver for Turbine is for MySQL.
#
# The parameters to connect to the default database. You MUST
# configure these properly.
# -------------------------------------------------------------------
database.default.driver=com.cariboulake.jsql.JSQLDriver
database.default.url=jdbc:caribou:jsqlingres://mermaid:60241/jproto
database.default.username=nate
database.default.password=none
# The number of database connections to cache per ConnectionPool
# instance (specified per database).
database.default.maxConnections=3
# The amount of time (in milliseconds) that database connections will be
# cached (specified per database).
#
# Default: one hour = 60 * 60 * 1000
database.default.expiryTime=3600000
# The amount of time (in milliseconds) a connection request will have to wait
# before a time out occurs and an error is thrown.
#
# Default: ten seconds = 10 * 1000
database.connectionWaitTimeout=10000
# The interval (in milliseconds) between which the PoolBrokerService logs
# the status of it's ConnectionPools.
#
# Default: No logging = 0 = 0 * 1000
database.logInterval=0
# These are the supported JDBC drivers and their associated Turbine
# adaptor. These properties are used by the DBFactory. You can add
# all the drivers you want here.
database.adaptor=DBIngres
database.adaptor.DBIngres=com.cariboulake.jsql.JSQLDriver
# Determines if the quantity column of the IDBroker's id_table should
# be increased automatically if requests for ids reaches a high
# volume.
database.idbroker.cleverquantity=true
# -------------------------------------------------------------------
#
# F R A M E W O R K S E T T I N G S
#
# -------------------------------------------------------------------
# These are settings that control the behaviour of the framework,
# such as determining whether a template system is in use, what
# the default templates and screens are and session handling settings.
# -------------------------------------------------------------------
# Used to set the template homepage if you are using a template
# layout.
#
# Default: /Index.vm
template.homepage=/Index.vm
# This is the default screen to show to people when they first access
# the system. Specify one of the template screens such as VelocityScreen
# to use a template system.
#
# Default: Login
screen.homepage=
# This is the template that is shown on an incorrect login attempt.
# Setting this property will override any value of screen.login specfied
# below.
#
# Default: Login.vm
template.login=/Login.vm
# This is the page that is shown on an incorrect login attempt. It is
# referenced in the LoginUser action. Note that it will only be used if
# a login template has not been specified (see template.login above).
#
# Default: Login
screen.login=
# This is the template that is used by the respective Template based
# ErrorScreen for displaying the error. If you are not using a Template based
# ErrorScreen, then this is ignored.
#
# Default: /Error.vm
template.error=/Error.vm
# This is the default error screen.
#
# Default: VelocityErrorScreen
screen.error=VelocityErrorScreen
# This is the screen that is displayed when the user's web page is in
# an invalid state.
#
# Default: error.InvalidState
screen.invalidstate=error.InvalidState
# Set the default Doctype. The default Doctype can be set by using
# the single strings: Html40Strict, Html40Transitional, or
# Html40Frameset. Additionally the default can be supplied as two
# strings separated by a comma giving the DTD and URI.
#
# Default: ignored if not set to some value.
default.doctype=Html40Transitional
# This is the default action to log a user in.
action.login=LoginUser
# This is the default action to log a user out.
action.logout=LogoutUser
# This is the default action to validate whether or not a session is
# valid. For example, if you want to make sure if a user has already
# logged in or not.
#
# Default: SessionValidator
action.sessionvalidator=sessionvalidator.TemplateSessionValidator
# This is the timeout in seconds for sessions. If left commented out, the
# servlet container's default timeout will be left as is.
# session.timeout=1800
# This is the default action that builds up the AccessControlList for
# the individual users session.
action.accesscontroller=AccessController
# -------------------------------------------------------------------
#
# J N D I C O N T E X T S
#
# -------------------------------------------------------------------
# This indicates whether Turbine should try to create JNDI contexts.
#
# Default: false
#
# contexts=true
# These are the JNDI context properties. Each context's properties
# are defined by the properties beginning with context.name.
#
# Default: none
#
# Example: The following will create a JNDI context named "name" in
# the data.contexts Hashtable. It will point at the RMI registry on
# localhost running on port 1099, and will use
# com.sun.jndi.rmi.registry.RegistryContextFactory as the initial
# context factory:
#
# context.name.java.naming.provider.url=rmi://localhost:1099
#
context.name.java.naming.factory.initial=com.sun.jndi.rmi.registry.RegistryContextFactory
# -------------------------------------------------------------------
#
# P E E R S
#
# -------------------------------------------------------------------
# Supplies Turbine with information about the database schema, which
# can simplify any required Peer classes.
#
# Default: org.apache.turbine.util.db.map.TurbineMapBuilder
# -------------------------------------------------------------------
database.maps.builder=org.apache.turbine.util.db.map.TurbineMapBuilder
# -------------------------------------------------------------------
#
# M E S S A G E S
#
# -------------------------------------------------------------------
# Note that strings containing "," (comma) characters must backslash
# escape the comma (i.e. '\,')
# The message that can be displayed before a user logs in.
login.message=Thank you for your visit. Please log into the system.
# The message that can be displayed when no screen is defined.
login.message.noscreen=There has been an error. Your session is valid but the screen
variable is not defined.
# The message that can be displayed when a user enters an incorrect
# password or username.
login.error=Sorry your username or password is incorrect!
# The message that can be displayed when a user logs out.
logout.message=Thank you for using the system. Please come back soon.
# -------------------------------------------------------------------
#
# S E C U R E S O C K E T S L A Y E R
#
# -------------------------------------------------------------------
# Whether the web server is able to use SSL. Links in Turbine can
# check this property to determine if SSL can be used.
#
# Default: true
# -------------------------------------------------------------------
use.ssl=true
# -------------------------------------------------------------------
#
# S E R V I C E S
#
# -------------------------------------------------------------------
# Classes for Turbine Services should be defined here.
# Format: services.[name].classname=[implementing class]
#
# To specify properties of a service use the following syntax:
# service.[name].[property]=[value]
#
# The order that these services is listed is important! The
# order that is stated here is the order in which the services
# will be initialized. Keep this is mind if you have services
# that depend on other services during initialization.
# -------------------------------------------------------------------
services.ResourceService.classname=org.apache.turbine.services.resources.TurbineResourceService
services.LoggingService.classname=org.apache.turbine.services.logging.TurbineLoggingService
services.FactoryService.classname=org.apache.turbine.services.factory.TurbineFactoryService
services.PoolService.classname=org.apache.turbine.services.pool.TurbinePoolService
services.RunDataService.classname=org.apache.turbine.services.rundata.TurbineRunDataService
services.ServletService.classname=org.apache.turbine.services.servlet.TurbineServletService
services.AssemblerBrokerService.classname=org.apache.turbine.services.assemblerbroker.TurbineAssemblerBrokerService
services.LocalizationService.classname=org.apache.turbine.services.localization.TurbineLocalizationService
services.MimeTypeService.classname=org.apache.turbine.services.mimetype.TurbineMimeTypeService
services.GlobalCacheService.classname=org.apache.turbine.services.cache.TurbineGlobalCacheService
services.SchedulerService.classname=org.apache.turbine.services.schedule.TurbineSchedulerService
services.XmlRpcService.classname=org.apache.turbine.services.xmlrpc.TurbineXmlRpcService
services.UniqueIdService.classname=org.apache.turbine.services.uniqueid.TurbineUniqueIdService
services.UploadService.classname=org.apache.turbine.services.upload.TurbineUploadService
services.SecurityService.classname=org.apache.turbine.services.security.db.DBSecurityService
services.PoolBrokerService.classname=org.apache.turbine.services.db.TurbinePoolBrokerService
services.MapBrokerService.classname=org.apache.turbine.services.db.TurbineMapBrokerService
services.PullService.classname=org.apache.turbine.services.pull.TurbinePullService
#services.IntakeService.classname=org.apache.turbine.services.intake.TurbineIntakeService
services.TemplateService.classname=org.apache.turbine.services.template.TurbineTemplateService
services.XSLTService.classname=org.apache.turbine.services.xslt.TurbineXSLTService
# Turn on the appropriate template service.
services.VelocityService.classname=org.apache.turbine.services.velocity.TurbineVelocityService
# -------------------------------------------------------------------
#
# R U N D A T A S E R V I C E
#
# -------------------------------------------------------------------
# Default implementations of base interfaces for request processing.
# Additional configurations can be defined by using other keys
# in the place of the <default> key.
# -------------------------------------------------------------------
services.RunDataService.default.run.data=org.apache.turbine.services.rundata.DefaultTurbineRunData
services.RunDataService.default.parameter.parser=org.apache.turbine.util.parser.DefaultParameterParser
services.RunDataService.default.cookie.parser=org.apache.turbine.util.parser.DefaultCookieParser
# -------------------------------------------------------------------
#
# C A C H E S E R V I C E
#
# -------------------------------------------------------------------
# Interval at which the cache will be checked. The default is
# 5000ms or 5 seconds.
services.GlobalCacheService.cache.check.frequency = 5000
# -------------------------------------------------------------------
#
# A S S E M B L E R B R O K E R S E R V I C E
#
# -------------------------------------------------------------------
# A list of AssemblerFactory classes that will be registered
# with TurbineAssemblerBrokerService
# -------------------------------------------------------------------
services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.java.JavaScreenFactory
#services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.python.PythonScreenFactory
services.AssemblerBrokerService.action=org.apache.turbine.services.assemblerbroker.util.java.JavaActionFactory
services.AssemblerBrokerService.layout=org.apache.turbine.services.assemblerbroker.util.java.JavaLayoutFactory
services.AssemblerBrokerService.page=org.apache.turbine.services.assemblerbroker.util.java.JavaPageFactory
services.AssemblerBrokerService.navigation=org.apache.turbine.services.assemblerbroker.util.java.JavaNavigationFactory
services.AssemblerBrokerService.scheduledjob=org.apache.turbine.services.assemblerbroker.util.java.JavaScheduledJobFactory
# -------------------------------------------------------------------
#
# T E M P L A T E S E R V I C E
#
# -------------------------------------------------------------------
# Roughly, the number of templates in each category.
#
# Defaults: layout=2, navigation=10, screen=50
services.TemplateService.layout.cache.size=2
services.TemplateService.navigation.cache.size=10
services.TemplateService.screen.cache.size=50
# -------------------------------------------------------------------
#
# P U L L S E R V I C E
#
# -------------------------------------------------------------------
# These are the properties for the Pull Service, the service
# that works in conjuction with the Turbine Pull Model API.
# -------------------------------------------------------------------
# This determines whether the non-request tools are refreshed
# on each request (request tools aren't ever, because they're
# instantiated for the request only anyway).
services.PullService.tools.per.request.refresh=true
# These are tools that are placed in the context by the service
# These tools will be made available to all your
# templates. You list the tools in the following way:
#
# tool.<scope>.<id> = <classname>
#
# <scope> is the tool scope: global, request, session
# or persistent (see below for more details)
# <id> is the name of the tool in the context
#
# You can configure the tools in this way:
# tool.<id>.<parameter> = <value>
#
# So if you find "global", "request", "session" or "persistent" as second
# part, it is a configuration to put a tool into the toolbox, else it is a
# tool specific configuration.
#
# For example:
#
# tool.global.ui = org.apache.turbine.util.pull.UIManager
# tool.global.mm = org.apache.turbine.util.pull.MessageManager
# tool.request.link = org.apache.turbine.util.template.TemplateLink
# tool.request.page = org.apache.turbine.util.template.TemplatePageAttributes
#
# Then:
#
# tool.ui.skin = default
#
# configures the value of "skin" for the "ui" tool.
#
# Tools are accessible in all templates by the <id> given
# to the tool. So for the above listings the UIManager would
# be available as $ui, the MessageManager as $mm, the TemplateLink
# as $link and the TemplatePageAttributes as $page.
#
# You should avoid using tool names called "global", "request",
# "session" or "persistent" because of clashes with the possible Scopes.
#
# Scopes:
#
# global: tool is instantiated once and that instance is available
# to all templates for all requests. Tool must be threadsafe.
#
# request: tool is instantiated once for each request (although the
# PoolService is used to recycle instances). Tool need not
# be threadsafe.
#
# session: tool is instantiated once for each user session, and is
# stored in the user's temporary hashtable. Tool should be
# threadsafe.
#
# persistent: tool is instantitated once for each use session, and
# is stored in the user's permanent hashtable. This means
# for a logged in user the tool will be persisted in the
# user's objectdata. Tool should be threadsafe and
# Serializable.
#
# Defaults: none
tool.request.link=org.apache.turbine.util.template.TemplateLink
tool.request.page=org.apache.turbine.util.template.TemplatePageAttributes
tool.request.content=org.apache.turbine.util.ContentURI
tool.request.flux=org.apache.turbine.flux.tools.FluxTool
# These are intake tools.
#tool.request.om=org.apache.turbine.om.OMTool
#tool.request.intake=org.apache.turbine.services.intake.IntakeTool
tool.global.ui=org.apache.turbine.services.pull.util.UIManager
# The UI Manager will allow you to skin your Turbine
# application using simple properties files that are
# located in the WEBAPP/resources/ui/skins/ directory
# hierarchy.
tool.ui.skin=default
# -------------------------------------------------------------------
#
# V E L O C I T Y S E R V I C E
#
# -------------------------------------------------------------------
# The location of Velocity configuration file, relative to webapp root
# These properties will override the default properties set by Velocity.
# You should specify the path to the templates directories as well as
# the path to the log file and they should also be relative to webapp root
services.VelocityService.template.extension=vm
services.VelocityService.default.page = VelocityPage
services.VelocityService.default.screen=VelocityScreen
services.VelocityService.default.layout = VelocityECSLayout
services.VelocityService.default.navigation=VelocityNavigation
services.VelocityService.default.error.screen = VelocityErrorScreen
services.VelocityService.default.layout.template = /Default.vm
services.VelocityService.runtime.log=logs/velocity.log
#services.VelocityService.input.encoding=UTF-8
services.VelocityService.velocimacro.library = GlobalMacros.vm
services.VelocityService.resource.loader = file
services.VelocityService.file.resource.loader.description = Velocity File Resource
Loader
services.VelocityService.file.resource.loader.class =
org.apache.velocity.runtime.resource.loader.FileResourceLoader
services.VelocityService.file.resource.loader.path = /templates/app,/templates/flux
services.VelocityService.file.resource.loader.cache = false
services.VelocityService.file.resource.loader.modificationCheckInterval = 2
services.VelocityService.resource.loader = classpath
services.VelocityService.classpath.resource.loader.description = Velocity Classpath
Resource Loader
services.VelocityService.classpath.resource.loader.class =
org.apache.velocity.runtime.resource.loader.ClasspathResourceLoader
# -------------------------------------------------------------------
#
# J S P S E R V I C E
#
# -------------------------------------------------------------------
services.JspService.template.extension=jsp
services.JspService.default.page = JspPage
services.JspService.default.screen=BaseJspScreen
services.JspService.default.layout = JspLayout
services.JspService.default.navigation=BaseJspNavigation
services.JspService.default.error.screen = JspErrorScreen
services.JspService.default.layout.template = /Default.jsp
services.JspService.templates = /templates/app,/templates/flux
services.JspService.buffer.size = 8192
# -------------------------------------------------------------------
#
# W E B M A C R O S E R V I C E
#
# -------------------------------------------------------------------
services.WebMacroService.template.extension=wm
services.WebMacroService.default.page = WebMacroSitePage
services.WebMacroService.default.screen=WebMacroSiteScreen
services.WebMacroService.default.layout = WebMacroSiteLayout
services.WebMacroService.default.navigation=WebMacroSiteNavigation
services.WebMacroService.default.error.screen = WebMacroSiteErrorScreen
services.WebMacroService.default.layout.template = /Default.wm
# The location of WebMacro configuration file, relative to webapp
# root.
services.WebMacroService.properties=/WEB-INF/conf/WebMacro.properties
# The path where WebMacro will look for templates, relative to webapp
# root. Use your system's path separator to specify multiple paths.
services.WebMacroService.templates=/templates/app,/templates/flux
# The class that will act as a template provider in webmacro. We can
# use default class from WebMacro (template path above is pushed into
# WebMacro configuration mechanism, so that class can pick it up), or
# some other custom class
services.WebMacroService.templates.provider=org.apache.turbine.services.webmacro.TurbineTemplateProvider
# -------------------------------------------------------------------
#
# F R E E M A R K E R S E R V I C E
#
# -------------------------------------------------------------------
# The path where FreeMarker will look for templates, relative to
# webapp root, if supported by the servlet engine.
#
# Default: /templates
services.FreeMarkerService.templates=/templates
# -------------------------------------------------------------------
#
# U P L O A D S E R V I C E
#
# -------------------------------------------------------------------
# Whether the files should be automatically picked up by
# ParameterParser.
services.UploadService.automatic=true
#
# The directory where files will be temporarily stored.
#
services.UploadService.repository=.
#
# The maximum size of a request that will be processed.
#
services.UploadService.size.max=1048576
#
# The maximum size of a request that will have it's elements cached in
# memory by TurbineUploadService class.
#
services.UploadService.size.threshold=10240
# -------------------------------------------------------------------
#
# L O C A L I Z A T I O N S E R V I C E
#
# -------------------------------------------------------------------
# Default ResourceBundle and language/country codes used by the
# TurbineLocalizationService.
#
locale.default.bundle=MyBundle
locale.default.language=en
locale.default.country=US
#
# This will set the charset= portion of the ContentType: header.
# Leave commented out unless you want to return stuff as a different
# charset.
#
# locale.default.charset=
# -------------------------------------------------------------------
#
# M I M E T Y P E S E R V I C E
#
# -------------------------------------------------------------------
# This property specifies a file containing mappings between MIME
# content types and the corresponding file name extensions. The
# service itself contains a hardcoded set of most common mappings.
# The file must use the same syntax as the mime.types file of
# the Apache Server, i.e.
# <mimetype> <ext1> <ext2>...
#
#services.MimeTypeService.mime.types=/WEB-INF/conf/mime.types
# This property specifies a file containing mappings between locales
# and the corresponding character encodings. The service itself
# contains a hardcoded set of most common mappings.
# The file should use the Java property file syntax, i.e.
# <lang_country_variant>=<charset>
#
#services.MimeTypeService.charsets=/WEB-INF/conf/charset.properties
# -------------------------------------------------------------------
#
# S C H E D U L E R S E R V I C E
#
# -------------------------------------------------------------------
#
# Set enabled to true to start the scheduler.
#
# Default = false
#
scheduler.enabled=false
# -------------------------------------------------------------------
#
# S E C U R I T Y S E R V I C E
#
# -------------------------------------------------------------------
#
# This is the class that implements the User interface.
# You want to override this setting only if you want your User
# implementation to provide application specific addtional
# functionality.
#
# Default: org.apache.turbine.om.security.TurbineUser
#
services.SecurityService.user.class=org.apache.turbine.om.security.TurbineUser
#
# This setting is DBSecurityService specific - this class is consulted for the names
# of the columns in the users' tables for the purpose of creating join queries.
# If you use your own User implementation in conjunction with DBSecurityService,
# it's peer class must implement org.apache.turbine.om.security.peer.UserPeer
interface,
# and you need to specify the name of the peer class here.
#
# Defalut: org.apache.turbine.om.security.peer.TurbineUserPeer
#
services.SecurityService.userPeer.class=org.apache.turbine.om.security.peer.TurbineUserPeer
#
# This is the class that implements UserManager interface.
# Override this setting if you want your User information stored
# on a different medium (LADP directory is a good example).
# Default implementation uses Peers and a relational database .
#
services.SecurityService.user.manager=org.apache.turbine.services.security.db.DBUserManager
#
# This is used by the SecurityService to make the password checking
# secure. When enabled, passwords are transformed by a one-way
# function into a sequence of bytes that is base64 encoded.
# It is impossible to guess the plain-text form of the password
# from the representation. When user logs in, the entered password
# is transformed the same way and then compared with stored value.
#
# Default: false
#
services.SecurityService.secure.passwords=false
#
# This property lets you choose what digest algorithm will be used
# for encrypting passwords. Check documentation of your JRE for
# available algorithms.
#
# Default: SHA
#
services.SecurityService.secure.passwords.algorithm=SHA
# Configuration for the LDAP Security Service implementation
#services.SecurityService.ldap.security.athentication=simple
#services.SecurityService.ldap.port=<LDAP PORT>
#services.SecurityService.ldap.host=<LDAP HOST>
#services.SecurityService.ldap.admin.username=<ADMIN USERNAME>
#services.SecurityService.ldap.admin.password=<ADMIN PASSWORD>
#services.SecurityService.ldap.user.basesearch=<SEARCH PATTERN>
#services.SecurityService.ldap.user.search.filter=<SEARCH FILTER>
#services.SecurityService.ldap.dn.attribute=userPrincipalName
#services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory
# -------------------------------------------------------------------
#
# X M L R P C S E R V I C E
#
# -------------------------------------------------------------------
# This property specifies which class should be used to parse
# xml for XmlRpc functionality.
#
# Default: org.apache.xerces.parsers.SAXParser
services.XmlRpcService.parser=org.apache.xerces.parsers.SAXParser
# This property specifies which port the server part of the XmlRpc
# should listen, if it is active.
#
# Default: 12345
services.XmlRpcService.port=12345
# If any classes are specified here, the Service will create an
# instance of them here and start up a listener on the specified
# port.
#
# Note that the handlers demonstrated are not very useful. You
# will have to invent your own services. They do however
# illustrate that any class with a default constructor can be
# added here
#
# The handler parameter without further extension determines
# the default handler for the service
#
# Default: no classes are specified by default
#services.XmlRpcService.handler.$default=java.util.Hashtable
#services.XmlRpcService.handler.stringhandler=java.lang.String
# The following properties allow the transfer of data between
# separate Turbine applications running on different servers.
# This allows B2B type behavior such as sending database
# updates in the form of XML or whatever type of data
# that needs to be shared between Turbine applications
# running on separate servers.
services.XmlRpcService.handler.file =
org.apache.turbine.services.xmlrpc.util.FileHandler
services.XmlRpcService.paranoid = false
services.XmlRpcService.acceptClient = 192.168.1.*
services.XmlRpcService.denyClient =
# -------------------------------------------------------------------
#
# P O O L S E R V I C E
#
# -------------------------------------------------------------------
# Default capacity of pools of the Object pooling service.
#
# Default: 128
services.PoolService.pool.capacity = 128
# Class specific capacities used instead of the default if specified.
#
#services.PoolService.pool.capacity.org.apache.turbine.services.rundata.DefaultTurbineRunData=512
# -------------------------------------------------------------------
#
# F A C T O R Y S E R V I C E
#
# -------------------------------------------------------------------
# A comma separated list of classloaders (very optional)
#
# Example: org.foo.bar.MyClassLoader, org.ack.joe.YourClassLoader
#
#services.FactoryService.class.loaders=
# Customized factories to be used instead of the default factory.
# E.g. to instantiate XML parsers, SSL sockets, etc., which require
# specific instantiation not supported by the default factory.
# The property name is prefixed with "factory" followed by the
# name of the production class. The value is the class name of
# the factory implementing the Factory interface. The factory
# will be instantiated by using the service itself.
#
# Examples:
#
#
services.FactoryService.factory.javax.xml.parsers.DocumentBuilder=org.foo.xml.DomBuilderFactory
#
services.FactoryService.factory.javax.xml.parsers.SAXParser=org.foo.xml.SaxParserFactory
#
services.FactoryService.factory.java.net.ServerSocket=org.foo.net.SslServerSocketFactory
#--------------------------------------------------------------------
#
# X S L T S E R V I C E
#
#--------------------------------------------------------------------
services.XSLTService.path = /path/to/stylesheets
services.XSLTService.cache = false
#--------------------------------------------------------------------
#
# P A R A M E T E R P A R S E R
#
#--------------------------------------------------------------------
#
# This variable controls the case folding applied to URL variable
# names.
#
# Allowed values: none, lower, upper
# Default: lower
#
url.case.folding=lower
# -------------------------------------------------------------------
#
# A D D I T I O N A L P R O P E R T I E S
#
# -------------------------------------------------------------------
# The full path name to an additional properties file. Properties in
# this file will be included in this property set. Duplicate name
# values will be replaced, so be careful.
#
# Default: none
# -------------------------------------------------------------------
include = Flux.properties
--
To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: <mailto:[EMAIL PROTECTED]>
