Sebastien, The apt-get commands for the missing requiements are
$ sudo apt-get install libxml2-dev $ sudo apt-get install g++ $ sudo apt-get install make $ sudo apt-get install automake1.9 $ sudo apt-get install libtool Using libxml2-dev fixed the xmlstring.h problem (the standard libxml2 package doesn't have it) so now SDO works fine. But It still will not compile SCA. The error "error: commonj/sdo/SDO.h: No such file or directory " continues to occur. I'm fairly certain $TUSCANY_SDOCPP is set properly, so I'm not sure what is going. -David On 7/20/06, Jean-Sebastien Delfino <[EMAIL PROTECTED]> wrote:
David Wheeler wrote: > Well, I tried compliling it under Ubuntu and it isn't quite working. > Ubuntu starts out as a very basic install so in order to compile it, I > had > to install not just Java, Ant, Svn, and Axis2C, but g++, make, > automake, and > libtool. > It is also a debian based system so it uses apt instead of rpm for > package > managment, so the command to check for libxml2 is "sudo apt-cache show > libxml2" > > Anyhow, once that is all installed augen.sh runs fine, configure runs > fine, > but make fails. > > It might have to do with my gcc version which is 4.0.3 > > Here is a dump of make's output: > > make all-recursive > make[1]: Entering directory `/home/dwheeler/tuscany/cpp/sdo' > Making all in runtime > make[2]: Entering directory `/home/dwheeler/tuscany/cpp/sdo/runtime' > Making all in core > make[3]: Entering directory `/home/dwheeler/tuscany/cpp/sdo/runtime/core' > Making all in src > make[4]: Entering directory > `/home/dwheeler/tuscany/cpp/sdo/runtime/core/src' > Making all in commonj > make[5]: Entering directory > `/home/dwheeler/tuscany/cpp/sdo/runtime/core/src/commonj' > Making all in sdo > make[6]: Entering directory > `/home/dwheeler/tuscany/cpp/sdo/runtime/core/src/commonj/sdo' > if /bin/sh ../../../../../libtool --tag=CXX --mode=compile g++ > -DHAVE_CONFIG_H -I. -I. -I../../../../.. -I../ > ../../../../runtime/core/src > -I -g -O2 -MT ChangedDataObjectListImpl.lo -MD -MP -MF > ".deps/ChangedDataObje ctListImpl.Tpo" -c -o ChangedDataObjectListImpl.lo > ChangedDataObjectListImpl.cpp; \ > then mv -f ".deps/ChangedDataObjectListImpl.Tpo" > ".deps/ChangedDataObjectListImpl.Plo"; else rm -f ". > deps/ChangedDataObjectListImpl.Tpo"; exit 1; fi > mkdir .libs > g++ -DHAVE_CONFIG_H -I. -I. -I../../../../.. > -I../../../../../runtime/core/src -I -g -O2 -MT ChangedDataObje > ctListImpl.lo -MD -MP -MF .deps/ChangedDataObjectListImpl.Tpo -c > ChangedDataObjectListImpl.cpp -fPIC -DPIC - o > .libs/ChangedDataObjectListImpl.o > In file included from > ../../../../../runtime/core/src/commonj/sdo/ChangeSummaryImpl.h:30, > from > ../../../../../runtime/core/src/commonj/sdo/DataObjectImpl.h:41, > from ChangedDataObjectListImpl.cpp:31: > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:26:30: error: > libxml/xmlstring.h: No such file or directory > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:45: error: > expected ',' or '...' before '*' token > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:45: error: ISO > C++ forbids declaration of 'xmlChar ' with no type > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:48: error: > expected ',' or '...' before '*' token > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:48: error: ISO > C++ forbids declaration of 'xmlChar ' with no type > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:48: error: > 'commonj::sdo::SDOXMLString::SDOXMLStri ng(int)' cannot be overloaded > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:45: error: > with > 'commonj::sdo::SDOXMLString::SDOXM LString(int)' > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:57: error: > expected ',' or '...' before '*' token > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:57: error: ISO > C++ forbids declaration of 'xmlChar ' with no type > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:60: error: > expected ',' or '...' before '*' token > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:60: error: ISO > C++ forbids declaration of 'xmlChar ' with no type > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:67: error: ISO > C++ forbids declaration of 'type na me' with no type > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:67: error: > 'operator const int' does not name a ty pe > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:83: error: ISO > C++ forbids declaration of 'xmlChar ' with no type > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:83: error: > expected ';' before '*' token > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h: In member > function 'commonj::sdo::SDOXMLString::o perator const char*() const': > ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:66: error: > 'xmlForm' was not declared in this scop e > make[6]: *** [ChangedDataObjectListImpl.lo] Error 1 > > > > On 7/19/06, Jean-Sebastien Delfino <[EMAIL PROTECTED] > wrote: >> >> I just finished setting up a Tuscany C++ development and build >> environment on my Linux machine and thought it would be useful to share >> the steps I went through. >> >> I am using Redhat Linux Enterprise 4, but the same steps should work on >> other Linux systems like Fedora Core or Ubuntu for example. >> These steps take no more than 15 mns to complete, starting from scratch. >> After you complete them you should be all set to build the Tuscany C++ >> runtime, and start contributing :) >> >> From a shell prompt, create a $HOME/tuscany directory. >> >> Install the following prerequisites: >> >> * Subversion - SVN version 1.3.0 or later is good (most Linux distros >> already include SVN). >> >> * Ant and a Java JDK are required by the SCA code generation tool used >> to generate proxies and wrappers for C++ components. >> Download apache-ant-1.6.5-bin.tar.gz from >> http://ant.apache.org/bindownload.cgi. >> From $HOME/tuscany do tar xzf apache-ant-1.6.5-bin.tar.gz. >> Configure your environment: >> export ANT_HOME=$HOME/tuscany/apache-ant-1.6.5 >> PATH=$ANT_HOME/bin:$PATH >> >> Download jdk-1_5_0_06-linux-i586.bin from >> http://java.sun.com/j2se/1.5.0/download.jsp . >> From $HOME/tuscany run jdk-1_5_0_06-linux-i586.bin, this will extract >> the JDK in $HOME/tuscany/jdk1.5.0_06. >> Configure your environment: >> export JAVA_HOME=$HOME/tuscany/jdk1.5.0_06 >> PATH=$JAVA_HOME/bin:$PATH >> >> * Libxml2 2.6.20 or later >> Libxml2 is already in most Linux distros, just check that you have >> version 2.6.20 or later (my RHEL4 system had an older version and I had >> to upgrade it). >> To see which version of libxml2 is installed on your system do rpm -aq | >> grep libxml2. >> Configure your environment: >> export LIBXML2_LIB=/usr/lib >> export LIBXML2_INCLUDE=/usr/include/libxml2 >> >> * Axis2C version 0.92 >> Download axis2c-bin-0.92-linux.tar.gz from http://ws.apache.org/axis2/c . >> From $HOME/Tuscany do tar xzf axis2c-bin-0.92-linux.tar.gz, this will >> install Axis2C in $HOME/Tuscany/axis2c-bin-0.92-linux. >> Configure your environment: >> export AXIS2C_HOME=$HOME/tuscany/axis2c- bin-0.92-linux >> export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$AXIS2C_HOME/lib >> >> >> Download the Tuscany C++ code: >> From $HOME/tuscany, do svn co >> http://svn.apache.org/repos/asf/incubator/tuscany/cpp , this will check >> out all the source code in $HOME/tuscany/cpp. >> >> Configure your environment: >> export TUSCANY_SCACPP=$HOME/tuscany/cpp/sca/deploy >> export TUSCANY_SDOCPP=$HOME/tuscany/cpp/sdo/deploy >> export >> LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$TUSCANY_SDOCPP/lib:$TUSCANY_SCACPP/lib >> >> The builds use the GNU automake + configure tools, which nicely analyze >> your environment and generate all the make files you need. >> >> To build the SDO C++ runtime: >> cd $HOME/tuscany/cpp/sdo >> ./autogen.sh >> ./configure --prefix=$TUSCANY_SDOCPP --enable-static=no >> make >> make install >> cd $HOME/tuscany/cpp/sdo/samples >> ./autogen.sh >> ./configure --prefix=$TUSCANY_SDOCPP --enable-static=no >> make >> make install >> >> Note: Tuscany already has build.sh scripts that do all of this for you, >> but I wanted to use the individual commands to understand what was going >> on at each step. >> Also, when you make code changes in general you just run make and make >> install and not the whole set of steps. >> >> To run the the SDO test suite: >> cd $HOME/tuscany/cpp/sdo >> ./sdotest.sh >> >> To build the SCA C++ runtime: >> cd $HOME/tuscany/cpp/sca >> ./autogen.sh >> ./configure --prefix=$TUSCANY_SCACPP --enable-static=no >> make >> make install >> cd $HOME/tuscany/cpp/sdo/samples >> ./autogen.sh >> ./configure --prefix=$TUSCANY_SCACPP --enable-static=no >> make >> make install >> >> To run the SCA runtime tests: >> cd $HOME/tuscany/cpp/sdo >> ./scatest.sh >> >> To run the SCA calculator sample: >> cd $HOME/tuscany/cpp/sca/deploy/samples/Calculator/deploy/bin >> ./runclient.sh >> >> Overall it was pretty simple. I hope these steps will help people set >> their C++ build environment and come help us! >> >> Could other people in the group try these steps in other environments >> and see if they work for them? >> Do we have similar steps for Windows? >> >> -- >> Jean-Sebastien >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > David, Thanks for trying this on your system. Would you mind posting a brief description of the steps you followed to install the missing prereqs? Then I'll merge them with my steps into a Wiki page. Thanks! The first error in your make log: ../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:26:30: error: libxml/xmlstring.h: No such file or directory complains that libxml/xmlstring cannot be found. Could it be a problem with the location of libxml2 on your system and the LIBXML2_INCLUDE variable? Do you have a $LIBXML2_INCLUDE/libxml/xmlstring.h? -- Jean-Sebastien --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]