Steffen Gebert wrote:
Am 29.10.2009, 00:44 Uhr, schrieb Brad Klafehn <[email protected]>:
I obtained shell access to my shared hosting environment. I got the
file ImageMagick-4.2.9.tar.gz, transferred it to the hosting account
and unpacked it. For identify, combine, and convert, there were 2
files for each, identify.1 and identify.c. I renamed the identify.c
file, for example, to identify.bin, but left the identify/1 file
alone. I then created the 3 files (as you have using pico). For
example, my combine file reads:
*.c files are source code - you have to compile this before!
Maybe you should just use the static linked 4.2.9, which has been
available for years on typo3.sunsite.dk, but is now gone (I just realized).
Nevertheless: Please use IM 6 - version 4 isn't fully supported by TYPO3
4.3. Or use GraphicsMagick.
Steffen
OK. I gave up on ImageMagick and installed GraphicsMagick instead (ver.
1.3.7). I then ran configure to compile it. Unfortunately, it is still
not working in TYPO3. My configuration is as follows:
GraphicsMagick enabled: 1
GraphicsMagick path: /GraphicsMagick/GraphicsMagick-1.3.7/ ()
GraphicsMagick path/LZW: ()
Version 5/GraphicsMagick flag: gm
GDLib enabled: 1
GDLib using PNG: 0
GDLib 2 enabled: 0
IM5 effects enabled: -1 (Blurring/Sharpening with IM 5+)
Freetype DPI: 72 (Should be 96 for Freetype 2)
Mask invert: 0 (Should be set for some IM versions approx. 5.4+)
File Formats: gif,jpg,jpeg,tif,bmp,pcx,tga,png,pdf,ai
However, I have set the parameter im = 1. Should I set that to 0?
I also have not reset the PATH, MAGICK_HOME, and LD_LIBRARY_PATH
variables, as was suggested initially. Do I need to do that also
Danke sehr fuer deine Hilfe!
_______________________________________________
TYPO3-english mailing list
[email protected]
http://lists.typo3.org/cgi-bin/mailman/listinfo/typo3-english
