On Mon, 14 Jan 2008, Dirk Behme wrote: Aha! Here it is... :)
> > For NAND erase sizes smaller than one NAND erase block, erase percentage > output becomes grater than 100% e.g. > > -- cut -- > > nand info > Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB > > nand erase 0x100000 0x2000 > NAND erase: device 0 offset 0x100000, size 0x2000 > Erasing at 0x100000 -- 200% complete. > OK > > > -- cut -- > > Correct this and give user a warning that more is erased than specified: > > -- cut -- > > nand erase 0x100000 0x2000 > NAND erase: device 0 offset 0x100000, size 0x2000 > Warning: Erase size 0x00002000 smaller than one erase block 0x00004000 > Erasing 0x00004000 instead > Erasing at 0x100000 -- 100% complete. > OK > > > -- cut -- > > This patch is against u-boot-nand-flash.git. > > Signed-off-by: Dirk Behme <[EMAIL PROTECTED]> > > --- ****************************************************************** * [EMAIL PROTECTED] KOI8 Net < > The impossible we do immediately. * * Las Vegas NV, USA < > Miracles require 24-hour notice. * ****************************************************************** ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
