I can't read on the MMC. When I make "mmcinit" : Manufacturer ID: 15 OEM/Application ID: 0000 Product name: 000000 Product Revision: 1.11 Product Serial Number: 2701132109 Manufacturing Date: 00/10 CSD data: 9026012a 0f5903d3 f6dbffe9 96404093 Supports partial reads Does not support partial writes Card capacity: 556032 bytes Write protection: max_blksz = 1
and when I make "ext2load" : ....Failed to mount ext2 filesystem... ** Bad ext2 partition or disk - mmc 0:1 ** Thanks for your help, Regards Pierre -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Andy Fleming Envoyé : mardi 15 janvier 2008 17:18 À : Pierre Savary Cc : U-Boot-Users Objet : Re: [U-Boot-Users] MMC 4GB with at91sam9260 ... On Jan 15, 2008 1:49 AM, Pierre Savary <[EMAIL PROTECTED]> wrote: > Hi, > I need some help because I want to use an eMMC of 4GB but my U-Boot (1.1.5) > see it but can't use it... So I think it is a problem with "Max read data > block length" but I don't know what I can change in the code ... > Have somebody already try this? > Could you help me please? What kind of error do you get? Andy ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
