Jean-Christophe PLAGNIOL-VILLARD wrote:
>> +void reset_phy (void)
>> +{
>> + int i;
>> +
>> + /* initialize the PHY */
>> + miiphy_reset ("NPE0", CONFIG_PHY_ADDR);
>> +
>> + /* all LED outputs = Link/Act */
>> + miiphy_write ("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA);
>> +
>> + /* set all ethernet switch ports to forwarding state */
>> + for (i = 1; i <= 5; i++)
>> + miiphy_write ("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03);
>> +
>> +}
>>
>
> Could you specify cleary in each baord file on which do you work
???
> and
> please be more explicit about his constants, rather than using magic
> numbers.
>
The chip documentation is under NDA, so all I can do is hide away the
constants by inventing useless names for them.
cu
Michael
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
