On Tuesday 15 January 2008, Larry Johnson wrote: > The ECC POST reported intermittent failures running after power-up on > the Korat PPC440EPx board. Even when the test passed, the debugging > output occasionally reported additional unexpected ECC errors. > > This refactoring has three main objectives: (1) minimize the code > executed with ECC enabled during the tests, (2) add more checking of the > results so any unexpected ECC errors would cause the test to fail, and > (3) use synchronization (only) where required by the processor. > > Signed-off-by: Larry Johnson <[EMAIL PROTECTED]>
Applied, thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
