In message <[EMAIL PROTECTED]> you wrote:
>
> 1) also i made a change in the Makefile show above which made me wonder if
> using ppc_8xx as the default for all ppc board is a correct assumption ?
It's a pretty good default, as you can build all existing PPC targets
with it, and 90% of them will actually run on the target. Of course
it's not recommended to actually do that. Instead, you should always
set CXROSS_COMPILE as appropriate for your CPU.
> maybe its just a place holder. or maybe the rfmci is only available in
> ppc_8xx.
> 2) other question is what option do i have to use the latest u-boot 1.3.1
> with my ppc_440 build tools as it doesn't recognizes 'rfmci' opcode.
Please read the documentation for your toolchain, i. e. how to use it
correctly. If this doesn't help, please contact MontaVista technical
support.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Keep your eyes wide open before marriage, half shut afterwards.
-- Benjamin Franklin
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
