Hi all,
I'am playing to porting u-boot to Intel KIXRP435 board
and starting from u-boot-ixp-HEAD from git.
I added kixrp435 platform cloning ixdp425 platform.
I modified a include/asm-arm/arch-ixp/ixp425.h and
cpu/ixp/start.S to initialize a DDR memory.
The compilation fail with following error: make[1]: Entering directory `/home/antonello/projects/u-boot/u-boot-ixp-new/cpu/ixp' xscale_be-gcc -D__ASSEMBLY__ -g -Os -fno-strict-aliasing -fno-common -ffixed-r8 -msoft-float -mbig-endian -D__KERNEL__ -DTEXT_BASE=0x00f80000 -I/home/antonello/projects/u-boot/u-boot-ixp-new/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/mv5.0/montavista/pro/devkit/arm/xscale_be/bin/../lib/gcc/armv5teb-monta vista-linux-gnueabi/4.2.0/include -pipe -DCONFIG_ARM -D__ARM__ -mbig-endian -march=armv5te -mtune=strongarm1100 -mabi=apcs-gnu -c -o start.o start.S
start.S: Assembler messages:
start.S:527: Error: invalid constant (fffffbf4) after fixup
make[1]: *** [start.o] Error 1
make[1]: Leaving directory `/home/antonello/projects/u-boot/u-boot-ixp-new/cpu/ixp'
make: *** [cpu/ixp/libixp.a] Error 2
[EMAIL PROTECTED] u-boot-ixp-new]#
The problem seems due to the numbers of instruction in start.S file.
If I remove some instructions the compilation work fine.
I have attached a patch file. You can reproduce the problem removing
#define ERROR_AFTER_FIXUP statement in cpu/ixp/start.S file. Any suggestions ? Antonello
--- u-boot-ixp/cpu/ixp/start.S  2008-01-18 01:05:22.000000000 +0100
+++ u-boot-ixp-new/cpu/ixp/start.S      2008-02-08 20:15:37.000000000 +0100
@@ -165,48 +165,309 @@
        orr     r1, r1, #0x80000000
        str     r1, [r2]
 #endif
-       mov     r1, #CFG_SDR_CONFIG
-       ldr     r2, =IXP425_SDR_CONFIG
-       str     r1, [r2]
+       /* Setup DDR controller */
+       ldr     r0, =IXP_DDR_CFG_BASE1
+
+       ldr     r1, =KIXRP435_SDCR0_INIT
+       str     r1, [r0, #IXP_DDR_SDCR0]
 
-       /* disable refresh cycles */
-       mov     r1, #0
-       ldr     r3, =IXP425_SDR_REFRESH
-       str     r1, [r3]
-
-       /* send nop command */
-       mov     r1, #3
-       ldr     r4, =IXP425_SDR_IR
-       str     r1, [r4]
-       DELAY_FOR 0x4000, r0
-
-       /* set SDRAM internal refresh val */
-       ldr     r1, =CFG_SDRAM_REFRESH_CNT
-       str     r1, [r3]
-       DELAY_FOR 0x4000, r0
-
-       /* send precharge-all command to close all open banks */
-       mov     r1, #2
-       str     r1, [r4]
-       DELAY_FOR 0x4000, r0
-
-       /* provide 8 auto-refresh cycles */
-       mov     r1, #4
-       mov     r5, #8
-111:    str    r1, [r4]
-       DELAY_FOR 0x100, r0
-       subs    r5, r5, #1
-       bne     111b
-
-       /* set mode register in sdram */
-       mov     r1, #CFG_SDR_MODE_CONFIG
-       str     r1, [r4]
-       DELAY_FOR 0x4000, r0
-
-       /* send normal operation command */
-       mov     r1, #6
-       str     r1, [r4]
-       DELAY_FOR 0x4000, r0
+       ldr     r1, =KIXRP435_SDCR1_INIT
+       str     r1, [r0, #IXP_DDR_SDCR1]
+
+       mov     r1, #CFG_DRAM_BASE
+       str     r1, [r0, #IXP_DDR_SDBR]
+       ldr     r1, [r0, #IXP_DDR_SDBR]  /* readback */
+
+       ldr     r1, =KIXRP435_SBR0_INIT
+       str     r1, [r0, #IXP_DDR_SBR0]
+       ldr     r1, [r0, #IXP_DDR_SBR0]
+
+       ldr     r1, =KIXRP435_SBR1_INIT
+       str     r1, [r0, #IXP_DDR_SBR1]
+       ldr     r1, [r0, #IXP_DDR_SBR1]
+
+       /* Step 4. Disable refresh cycles */
+       mov     r1, #0
+       str     r1, [r0, #IXP_DDR_RFR]
+
+       /* Step 5. Send NOP command */
+       mov     r1, #DDR_SDIR_NOP
+       str     r1, [r0, #IXP_DDR_SDIR]
+
+       /* Step 6 */
+       DELAY_FOR 0x100000, r1
+
+       /* Step 7. Issue precharge-all command to close all open banks */
+       mov     r1, #DDR_SDIR_PRECHARGE_ALL
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 8. Issue an extended-mode-register2-set command */
+       mov     r1, #DDR_SDIR_EMRS_2_SET_CMD
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 9. Issue an extended-mode-register3-set command */
+       mov     r1, #DDR_SDIR_EMRS_3_SET_CMD
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 10. Issue extended mode register set to enable dll */
+       mov     r1, #DDR_SDIR_EMRS_DLL_ENABLE
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 11. Issue mode register set w/ DLL reset */
+       mov     r1, #DDR_SDIR_MODE_SET_RESET
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 12. Issue precharge-all command */
+       mov     r1, #DDR_SDIR_PRECHARGE_ALL
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 13. provide 2 auto-refresh cycles */
+       mov     r1, #DDR_SDIR_AUTO_REFRESH
+       mov     r2, #2
+  1:
+       str     r1, [r0, #IXP_DDR_SDIR]
+       ldr     r3, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x800, r3
+       subs    r2, r2, #1
+       bne     1b
+
+       /* Step 14. Issue mode register set w/o DLL reset */
+       mov     r1, #DDR_SDIR_MODE_SET_NO_RESET
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x100000, r1
+
+       /* Step 15. Start normal operation */
+       mov     r1, #0xf
+       str     r1, [r0, #IXP_DDR_SDIR]
+       DELAY_FOR 0x10000, r1
+
+       /* Step 16. Set refresh val */
+       ldr     r1, =KIXRP435_SDRAM_REFRESH_CNT
+       str     r1, [r0, #IXP_DDR_RFR]
+       DELAY_FOR 0x100000, r1
+
+       /* Additional setup for SDRAM controller */
+       ldr     r0, =IXP_DDR_CFG_BASE2
+
+       ldr     r1, = 0x00000004
+       str     r1, [r0, #IXP_DDR_RCVDLY]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x00000000
+       str     r1, [r0, #IXP_DDR_SLVLMIX0]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x00000000
+       str     r1, [r0, #IXP_DDR_SLVLMIX1]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x00000000
+       str     r1, [r0, #IXP_DDR_SLVHMIX0]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x00000000
+       str     r1, [r0, #IXP_DDR_SLVHMIX1]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x00000004
+       str     r1, [r0, #IXP_DDR_SLVLEN]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x00000000
+       str     r1, [r0, #IXP_DDR_MASTMIX]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0000000a
+       str     r1, [r0, #IXP_DDR_LEGOVERIDE]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0002D400
+       str     r1, [r0, #IXP_DDR_DDRMISCTL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0000889C
+       str     r1, [r0, #IXP_DDR_HM_WRCAL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0000889C
+       str     r1, [r0, #IXP_DDR_HM_WRCAL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0000889C
+       str     r1, [r0, #IXP_DDR_HM_WRCAL]
+       DELAY_FOR 0x100000, r1
+
+#if ERROR_AFTER_FIXUP
+       ldr     r1, = 0x0000889C
+       str     r1, [r0, #IXP_DDR_HM_WRCAL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0000889C
+       str     r1, [r0, #IXP_DDR_HM_WRCAL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x0000809C
+       str     r1, [r0, #IXP_DDR_HM_WRCAL]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000006
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000106
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000206
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000306
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000406
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000506
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000606
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81000706
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002006
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002106
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002206
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002306
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002406
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002506
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002606
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81002706
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004006
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004106
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004206
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004306
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004406
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004506
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004606
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81004706
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006006
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006106
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006206
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006306
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006406
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006506
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006606
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+
+       ldr     r1, = 0x81006706
+       str     r1, [r0, #IXP_DDR_DCALCSR]
+       DELAY_FOR 0x100000, r1
+#endif
 
        /* copy */
        mov     r0, #0
--- u-boot-ixp/include/asm-arm/arch-ixp/ixp425.h        2008-01-18 
01:05:22.000000000 +0100
+++ u-boot-ixp-new/include/asm-arm/arch-ixp/ixp425.h    2008-02-08 
18:39:16.000000000 +0100
@@ -178,6 +178,101 @@
 #define IXP425_SDR_IR          IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
 
 /*
+ * DDR register (IXP43X - IXP46X)
+ */
+#define IXP_DDR_CFG_BASE1      0xCC00E500
+#define IXP_DDR_CFG_BASE2      0xCC00F500
+
+#define IXP_DDR_SDIR           0x00
+#define IXP_DDR_SDCR0          0x04
+#define IXP_DDR_SDCR1          0x08
+#define IXP_DDR_SDBR           0x0C
+#define IXP_DDR_SBR0           0x10
+#define IXP_DDR_SBR1           0x14
+#define IXP_DDR_S32SR          0x18
+#define IXP_DDR_ECCR           0x1C
+#define IXP_DDR_ELOG0          0x20
+#define IXP_DDR_ELOG1          0x24
+#define IXP_DDR_ECAR0          0x28
+#define IXP_DDR_ECAR1          0x2C
+#define IXP_DDR_ECTST          0x30
+#define IXP_DDR_MCISR          0x34
+#define IXP_DDR_MACR           0x38
+#define IXP_DDR_MPTCR          0x3C
+#define IXP_DDR_MPCR           0x40
+#define IXP_DDR_RFR            0x48
+#define IXP_DDR_SDPR0          0x50
+#define IXP_DDR_SDPR1          0x54
+#define IXP_DDR_SDPR2          0x58
+#define IXP_DDR_SDPR3          0x5C
+#define IXP_DDR_SDPR4          0x60
+#define IXP_DDR_SDPR5          0x64
+#define IXP_DDR_SDPR6          0x68
+#define IXP_DDR_SDPR7          0x6C
+
+#define IXP_DDR_DCALCSR                0x00
+#define IXP_DDR_RCVDLY         0x50
+#define IXP_DDR_SLVLMIX0       0x54
+#define IXP_DDR_SLVLMIX1       0x58
+#define IXP_DDR_SLVHMIX0       0x5c
+#define IXP_DDR_SLVHMIX1       0x60
+#define IXP_DDR_SLVLEN         0x64
+#define IXP_DDR_MASTMIX                0x68
+#define IXP_DDR_LEGOVERIDE     0x74
+#define IXP_DDR_DDRMISCTL      0x78
+#define IXP_DDR_HM_WRCAL       0x7c
+
+/* SDIR command values */
+#define DDR_SDIR_MODE_SET_NO_RESET     0
+#define DDR_SDIR_MODE_SET_RESET                1
+#define DDR_SDIR_PRECHARGE_ALL         2
+#define DDR_SDIR_NOP                   3
+#define DDR_SDIR_EMRS_DLL_ENABLE       4
+#define DDR_SDIR_EMRS_DLL_DISABLE      5
+#define DDR_SDIR_AUTO_REFRESH          6
+#define DDR_SDIR_EMRS_2_SET_CMD                7
+#define DDR_SDIR_EMRS_3_SET_CMD                8
+
+/* SDCR0 bits */
+#define DDR_SDCR0_TRAS(x)      ((x)<<28)
+#define DDR_SDCR0_TRP(x)       ((x)<<24)
+#define DDR_SDCR0_TRCD(x)      ((x)<<20)
+#define DDR_SDCR0_TEDP(x)      ((x)<<16)
+#define DDR_SDCR0_TWL(x)       ((x)<<12)
+#define DDR_SDCR0_CAS_2                (0 << 8)
+#define DDR_SDCR0_CAS_2_5      (1 << 8)
+#define DDR_SDCR0_ODT_DISABLED (0 << 4)
+#define DDR_SDCR0_ODT_75       (1 << 4)
+#define DDR_SDCR0_ODT_150      (2 << 4)
+#define DDR_SDCR0_DDR_I                (1 << 2)
+#define DDR_SDCR0_BUS32                (1 << 1)
+
+/* SDCR1 bits */
+#define DDR_SDCR1_TRTCMD(x)    ((x)<<28)
+#define DDR_SDCR1_TWTCMD(x)    ((x)<<24)
+#define DDR_SDCR1_TRTW(x)      ((x)<<20)
+#define DDR_SDCR1_TRFC(x)      ((x)<<12)
+#define DDR_SDCR1_TWR(x)       ((x)<<9)
+#define DDR_SDCR1_TRC(x)       ((x)<<4)
+#define DDR_SDCR1_TWTRD(x)     ((x)<<0)
+
+/* SBR0/1 bits */
+#define DDR_SBR_128Mx8         (0<<30)
+#define DDR_SBR_128Mx16                (0<<30)
+#define DDR_SBR_256Mx8         (0<<30)
+#define DDR_SBR_512Mx8         (0<<30)
+#define DDR_SBR_512Mx16                (0<<30)
+#define DDR_SBR_1Gx8           (0<<30)
+#define DDR_SBR_256Mx16                (2<<30)
+#define DDR_SBR_1Gx16          (3<<30)
+
+/* ECCR bits */
+#define DDR_ECCR_ENABLE                (1 << 3)
+#define DDR_ECCR_SBEC          (1 << 2)
+#define DDR_ECCR_MBER          (1 << 1)
+#define DDR_ECCR_SBER          (1 << 0)
+
+/*
  * UART registers
  */
 #define IXP425_UART1   0
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to